Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LUCIO ANTONIO DURAN

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LUCIO ANTONIO DURAN in 800 CLARK STREET, EULESS, TX 76039 (NAICS 238130). OSHA activity number 345875389.

Watch Lucio Antonio Duran — free Get an email when a new federal OSHA severe-injury report for Lucio Antonio Duran is published. One employer, no account, unsubscribe in one click.
Establishment
LUCIO ANTONIO DURAN
Site address
800 CLARK STREET
City
EULESS
State
TX
ZIP
76039
Mailing
1300 KATY DRIVE, APT. 213, IRVING, TX 75061
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $2486.00
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns.   At the jobsite, employees were not wearing hardhats while working below other employees that were installing framing material to a residential house, exposing employees to struck-by hazards from falling objects.
Recent events (1)
  • — Z (S) $2486

1926.102 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $2486.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.   At the jobsite, employees operating Pneutools nail guns while performing framing activities were not wearing eye protection, exposing employees to the hazard of being struck by flying objects.
Recent events (1)
  • — Z (S) $2486

1926.405 G02 III

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $2486.00
29 CFR  1926.405(g)(2)(iii): Splices. Flexible cords shall be used only in continuous lengths without splice or tap.   At the jobsite, employees used a black power cord to power the Dewalt Skill saw.  The black cord was spliced to a orange extension cord and wrapped with black tape, exposing employees to the hazard of electrical burns and shock.
Recent events (1)
  • — Z (S) $2486

1926.501 B13

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $4351.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system.   At the jobsite, employees engaged in framing activities at a height of over 6 feet were not protected by a fall arrest system. Employees were exposed to an unprotected fall of over 08 feet to the ground below.
Recent events (1)
  • — Z (S) $4351

1926.503 A01

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $349.00 · Current $349.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  At the jobsite, the employer did not provide a training program with hazard recognition and avoidance training where employees were performing framing activities above 6 feet without fall protection and exposed to fall hazards at a heights of approximately 8 feet to the ground below.
Recent events (1)
  • — Z (O) $349

RNWBL

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345875389.