Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: ROCK-N-ROLL MATERIALS, INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROCK-N-ROLL MATERIALS, INC in 1401 S. NADER DR 5094, CHANDLER, AZ 85226 (NAICS 444190). OSHA activity number 346322837.

Watch Rock-N-Roll Materials, INC — free Get an email when a new federal OSHA severe-injury report for Rock-N-Roll Materials, INC is published. One employer, no account, unsubscribe in one click.
Site address
1401 S. NADER DR 5094
City
CHANDLER
State
AZ
ZIP
85226
Mailing
1401 S. NADER DR 5094, CHANDLER, AZ 85226
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
444190
Employees
15
Ownership type
A

8 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $6381.00 · Current $1000.00 Reduced
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees operated powered industrial trucks without the use of a seatbelt.  a) YARD: The employer failed to ensure that safety restraints were maintained on the KT Lift King forklift, exposing employees to crush-by hazards.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $6381

1910.176 B

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3099.00 · Current $1000.00 Reduced
29 CFR  1910.176(b):Storage of material created a hazard:  a)	YARD TOOL SHED:  Two tile saws and an air compressor were placed on pallets and stored on top of a wooden tool shed. The equipment was not secured to the pallets to prevent falling, and the loading capacity of the roof was not determined, exposing employees to crushed-by hazards.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3099

1910.303 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $3293.00 · Current $4000.00
29 CFR  1910.303(b)(2):Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a)	MAINTENANCE SHOP: A three-outlet adapter, was used to provide additional outlets to the Conex box instead of adding fixed wired receptacles, exposing employees to electrical and fire hazards.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $3293

1910.305 B02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3875.00 · Current $0.00 Reduced
29 CFR  1910.305(b)(2)(i):Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:  a)	MAINTENANCE SHOP: The outlet box containing a switch and receptacle was missing the faceplate and had the inner wires exposed, exposing employees to electrical hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3875

1910.305 J02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3875.00 · Current $0.00 Reduced
29 CFR  1910.305(j)(2)(i): Receptacles were not installed so that an energized attachment plug was not its source of supply:   a)	MAINTENANCE SHOP: A receptacle box mounted to the wall of the Conex box was powered by a flexible cord with plug attachments, exposing employees to shock hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3875

1910.305 G01 IV B

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors:  a)	MAINTENANCE SHOP: A receptacle box mounted to the wall of the Conex box was powered by a flexible cord with plug attachments that was ran through a hole in the wall, exposing employees to shock hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L06

Repeat Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $9117.00 · Current $4000.00 Reduced
29 CFR  1910.178(l)(6):The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a)	YARD: Employees operated powered industrial trucks and the employer had not certified an evaluation of their performance within the previous 3 years, exposing employees to struck-by hazards.    Rock-n-Roll Materials, Inc was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.178(l)(6), which was contained in OSHA inspection number 1319396, citation number 1, item number 2 and was affirmed as a final order on July 31, 2018 with respect to a workplace located at 1401 South Nader Drive, Chandler, AZ 85226.
Recent events (2)
  • — I (R) $4000
  • — Z (R) $9117

1904.40 A

Other-than-serious 1 instance 15 exposed
Issued
Abate by
Penalty
Initial $775.00 · Current $100.00 Reduced
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours.  The employer failed to provide copies of the injury and illness records to an authorized OSHA representative for calendar year 2019, 2020 and 2021, and 2022 to date, as requested.
Recent events (2)
  • — I (O) $100
  • — Z (O) $775

View ROCK-N-ROLL MATERIALS, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346322837.