OSHA Inspection: LARGE SCALE AUTOMATION SERVICES LLC

Issued

2023-05-22 00:00:00

Abate by

2023-06-16 00:00:00

Penalty

Initial $2678.00 · Current $1607.00 Reduced

General-duty citation text

29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:   a) Or or about December 21, 2022, at the welding department, medical evaluations were not conducted for employees required to use 3M half-face respirators.

Issued

2023-05-22 00:00:00

Abate by

2023-06-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.134(f)(1):  The employer shall ensure that employees using a tight-fitting facepiece respirator pass an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT) as stated in this paragraph:  a) On or about December 21, 2022, at the welding department, employer did not ensure employees that used a 3M half face respirator pass an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT), exposing employees to respiratory hazards.

Issued

2023-05-22 00:00:00

Abate by

2023-06-16 00:00:00

Penalty

Initial $5358.00 · Current $3215.00 Reduced

General-duty citation text

29 CFR  1910.243(c)(1):  Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4)(a):  a) Or or about December 21, 2022, at the grinding department, the DeWalt DWE4011 1 1/2 inch Angle grinders were not equipped with guards, exposing employees to amputation hazards.

Issued

2023-05-22 00:00:00

Abate by

2023-06-16 00:00:00

Penalty

Initial $893.00 · Current $536.00 Reduced

General-duty citation text

29 CFR  1904.29(a): The employer did not use an OSHA 300, 301 and 300A Form or equivalent:  a) On or about December 21, 2022, OSHA 300 logs for 2018, 2019, 2020, 2021, and 2022 were not used.