Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: XCLUSIVE CONCRETE, INC.

Unprogrammed Other inspection · Health discipline

On , OSHA opened an unprogrammed Other health inspection of XCLUSIVE CONCRETE, INC. in 2025 MINER STREET, DES PLAINES, IL 60016 (NAICS 238110). OSHA activity number 347402190.

Watch Xclusive Concrete, INC. — free Get an email when a new federal OSHA severe-injury report for Xclusive Concrete, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2025 MINER STREET
City
DES PLAINES
State
IL
ZIP
60016
Mailing
1251 REDEKER ROAD, DES PLAINES, IL 60016
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238110
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.1153 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $3457.00 · Current $2420.00 Reduced

Hazardous substances S103

29 CFR  1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  a) Location: Beluga Beach children's pool, Mystic Waters, 2025 Minter Street, Des Plaines, IL 60016. On April 10, 2024, Xclusive Concrete, Inc. did not fully and properly implement the engineering controls and work practices specified for the task on Table 1. Exposure for this jobsite occurred when employees were creating relief cuts in the concrete floor using a STIHL TS 420 handheld power saw.  No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $2419.9
  • — Z (S) $3457

1926.1153 D02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $0.00 · Current $0.00

Hazardous substances S103

29 CFR  1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:   a) Location: Beluga Beach children's pool, Mystic Waters, 2025 Minter Street, Des Plaines, IL 60016. On April 10, 2024, Xclusive Concrete, Inc. did not assess the exposure to crystalline silica for each employee exposed at the jobsite. Exposure for this jobsite occurred when employees were creating relief cuts in the concrete floor using a STIHL TS 420 handheld power saw.   No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances S103

29 CFR  1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   a) On April 10, 2024, Xclusive Concrete, Inc. did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following:  1) Requirement for labeling of containers of hazardous chemicals; 2) Safety data sheet availability; 3) Training of employees; 4) A complete list of hazardous chemicals known to be in the workplace; 5) Methods to inform employees of the hazards on non-routine tasks; and 6) Methods to inform other employer(s) of material safety data sheet availability; the labeling system; and any precautionary measures to protect employees.  Employees were exposed to chemicals, including but not limited to, crystalline silica, when creating relief cuts in the concrete floor using a STIHL TS 420 handheld power saw.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347402190.