Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: FMS CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FMS CONSTRUCTION in 145 TUN FRANCISCO DUNGCA STREET, TAMUNING, GU 96931 (NAICS 236118). OSHA activity number 347464422.

Watch FMS Construction — free Get an email when a new federal OSHA severe-injury report for FMS Construction is published. One employer, no account, unsubscribe in one click.
Establishment
FMS CONSTRUCTION
Site address
145 TUN FRANCISCO DUNGCA STREET
City
TAMUNING
State
GU
ZIP
96931
Mailing
P.O. BOX 12494, TAMUNING, GU 96931
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236118
Employees
11
Ownership type
A

8 citations on file for this inspection.

1910.134 C01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $2765.00
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (Construction Reference 1926.103)(a):   A written respiratory program was not developed for employees required to wear N95 respirators while cleaning and exposed to nuisance dust. Employees were exposed to respiratory hazards.
Recent events (1)
  • — Z (S) $2765

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (Construction Reference 1926.103):    At least one employee required to use an N95 disposable particulate filtering facepiece respirator was not medically cleared prior to use. Employees were exposed to respiratory hazards.
Recent events (1)
  • — Z (S) $0

1910.134 F02

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: (Construction Reference 1926.103)(a):   At least one employee required to use an N95 disposable particulate filtering facepiece respirator was not fit tested for a proper fit and seal prior to use. Employees were exposed to respiratory hazards.
Recent events (1)
  • — Z (S) $0

1910.134 G

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(g): The employer did not establish and implement procedures for the proper use of respirators, including taking action to ensure continued effective respirator operation throughout the work shift:   Exterior/back side of the house: A N95 8210 disposable particulate filtering facepiece respirator was being used upside down by an employee who had facial hair while conducting housekeeping duties. The employee was exposed to respiratory hazards.
Recent events (1)
  • — Z (S) $0

1926.501 B13

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $4702.00 · Current $4702.00
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   Front side of the roof: Employees were constantly working near the edge of the unprotected roof doing formwork and were not protected by a guardrail, safety net, or personal fall arrest system. Employees were exposed to fall hazards.
Recent events (1)
  • — Z (S) $4702

1926.701 B

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $2765.00
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall, was not guarded to eliminate the hazard of impalement:  Edge of roof: Rebar that protruded from the walking/working surface on the roof level was not guarded. Employees were exposed to impalement hazards.
Recent events (1)
  • — Z (S) $2765

1926.405 G02 III

Repeat Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $5530.00 · Current $5530.00
29 CFR  1926.405(g)(2)(iii): Flexible cords were not used in continuous lengths without splice or tap:   Exterior/back of the house: The white electrical cord used to provide power to the outlet boxes was spliced. Employees were exposed to electrical and fire hazards.  FMS Construction was previously cited for a violation of an equivalent standard (1926.403(e)), which was contained in OSHA inspection number 1707047, citation number 1, item number 1 and was affirmed as a final order on 12/20/2023, with respect to a workplace located at Tuncap Street Piti, Guam.
Recent events (1)
  • — Z (R) $5530

1926.403 B02

Other-than-serious 2 instances 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:  a. Interior of house and front side of roof: The Electro-Hydraulic Rebar Cutter used for cutting rebar was powered by two extension cords connected in series (daisy chained) and plugged into an outlet box that was located on the exterior/back of the house. The employee was exposed to electrical and fire hazards.  b. Exterior/back of the house: The outlet boxes used to provide power to the job site were designed to be installed in a wall but were surface mounted on the exterior of the back of the house. Employees were exposed to electrical and fire hazards.
Recent events (1)
  • — Z (O) $0

View FMS CONSTRUCTION's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347464422.