Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WHOLESALE LUMBER CO. / DO IT BEST HARDWARE

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of WHOLESALE LUMBER CO. / DO IT BEST HARDWARE in 12298 ALAMEDA AVENUE, CLINT, TX 79836 (NAICS 444110). OSHA activity number 347556896.

Watch Wholesale Lumber CO. / DO IT Best Hardware — free Get an email when a new federal OSHA severe-injury report for Wholesale Lumber CO. / DO IT Best Hardware is published. One employer, no account, unsubscribe in one click.
Site address
12298 ALAMEDA AVENUE
City
CLINT
State
TX
ZIP
79836
Mailing
12298 ALAMEDA AVENUE, CLINT, TX 79836
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
444110
Employees
12
Ownership type
A

4 citations on file for this inspection.

1910.303 B02

Serious Gravity 5 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $4610.00 · Current $3000.00 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  On or about June 17, 2024, on the eastside of the hardware department, employee(s) utilized a portable fan that was plugged into an extension cord that was being used as permanent wiring.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4610

1910.303 C03 I

Serious Gravity 5 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $4610.00 · Current $3000.00 Reduced
29 CFR  1910.303(c)(3)(i):Conductors were not spliced or joined with splicing devices identified for the use or by brazing, welding, or soldering with a fusible metal or alloy. Soldered splices were not first spliced or joined to be mechanically and electrically secure without solder and then soldered. All splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose:  On or about June 17, 2024, on the eastside of the hardware department, employee(s) utilized a portable fan that had splices that were not spliced or joined together by brazing, welding, or soldering with a fusible metal or alloy.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4610

1910.303 B01

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $518.00 · Current $500.00 Reduced
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees:  On or about June 17, 2024, on the northside of the warehouse, employee(s) were utilizing a portable cooling fan that was plugged into a 2-outlet receptacle which was damaged (cracked).
Recent events (2)
  • — I (O) $500
  • — Z (O) $518

1910.305 J02 IV

Other-than-serious 3 instances 10 exposed
Issued
Abate by
Penalty
Initial $518.00 · Current $500.00 Reduced
29 CFR 1910.305(j)(2)(iv): A receptacle installed in a wet or damp location was not suitable for the location:  On or about June 17, 2024, employee(s) utilized a 2-outlet receptacle that was located next to a water source that was not GFCI in the following instances:   a) In the break room area employee(s) utilized a microwave that was plugged into a 2 outlet-receptacle that was located next to a water source that was not GFCI.   b) On the northside of the warehouse employee(s) utilized a portable cooling unit that was plugged into a 2-outlet receptacle that was located next to a water source that was not GFCI.
Recent events (2)
  • — I (O) $500
  • — Z (O) $518

RNWBL

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347556896.