OSHA Inspection: PRECISION PROCESS INC

Issued

2024-08-20 00:00:00

Penalty

Initial $4839.00 · Current $3000.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a) On or about 08/01/2024, throughout the facility, the employer did not conduct periodic inspections of the Lockout/Tagout procedures for machines such as, but not limited to: Press 6 - Yamada Dobby NXT-40L 40 Ton press, CNC 001 Mazak VTC 200C, and CNC 004 - Mazak VTC 200B.  NO ABATEMENT DOCUMENTATION REQUIRED

Issued

2024-08-20 00:00:00

Penalty

Initial $4839.00 · Current $3000.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded, or guards were not designed and constructed, to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  a) On or about 08/01/2024, in the CNC Mill area; where the CNC 004 Mazak VTC 200b was able to be operated with the doors open because the proximity sensor was inoperable exposing employees to laceration hazards.  NO ABATEMENT CERTIFICATION REQUIRED.

Issued

2024-08-20 00:00:00

Penalty

Initial $3629.00 · Current $2500.00 Reduced

General-duty citation text

29 CFR  1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  a) On or about 07/25/24, in the Metal Stamping Department; Employees were exposed to flying debris when using airlines to clean presses and parts with >40 PSI.  NO ABATEMENT CERTIFICATION REQUIRED.

Issued

2024-08-20 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(5)(ii)(D):Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s)  a) On or about 08/01/2024, in the CNC Mill area; where tags, or other identifiers applied as energy isolating devices during servicing/maintenance operations on CNC Mill 001 did not include the identity of the employee who applied it,   NO ABATEMENT CERTIFICATION REQUIRED.