CHATSWORTH, IL —
OSHA Inspection: ZIMMERMAN FEED & GRAIN, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ZIMMERMAN FEED & GRAIN, INC. in 7794 N. 3350 E. ROAD, CHATSWORTH, IL 60921 (NAICS 424510). OSHA activity number 347929648.
Where did this inspection happen?
- Establishment
- ZIMMERMAN FEED & GRAIN, INC.
- Site address
- 7794 N. 3350 E. ROAD
- City
- CHATSWORTH
- State
- IL
- ZIP
- 60921
- Mailing
- 29697 EAST 825 NORTH ROAD, FORREST, IL 61741
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424510
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C06 I
- Issued
- Abate by
- Penalty
- Initial $11585.00 · Current $8109.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: On or about December 2, 2024, an employee was exposed to amputation hazards, while performing service and maintenance operations on Conveyor 8 in the Basement, Room 1. The employer did not conduct at least an annual periodic inspection of energy control procedures and their use by employees performing maintenance and servicing operations.
Recent events (2)
- — I (S) $8109
- — Z (S) $11585
1910.147 C07 I A
- Issued
- Abate by
- Penalty
- Initial $11585.00 · Current $8109.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: On or about December 2, 2024, an employee was exposed to amputation hazards, while performing service and maintenance operations on Conveyor 8 in the Basement, Room 1. The employer did not provide the employee with authorized lockout training prior to having the employee perform maintenance and servicing operations.
Recent events (2)
- — I (S) $8109
- — Z (S) $11585
1910.147 F02 I
- Issued
- Abate by
- Penalty
- Initial $11585.00 · Current $8109.00 Reduced
General-duty citation text
29 CFR 1910.147(f)(2)(i): When outside servicing personnel were engaged in activities in a facility, the onsite employer and the outside employer did not inform each other of their respective lockout or tagout procedures: On or about December 2, 2024, an employee was exposed to amputation hazards, while performing service and maintenance operations on Conveyor 8 in the Basement, Room 1. The employer did not ensure that the employer's authorized employees were aware and informed of the on-site employer's lockout or tagout procedures for onsite equipment.
Recent events (2)
- — I (S) $8109
- — Z (S) $11585
1910.151 B
- Issued
- Abate by
- Penalty
- Initial $11585.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.151(b): There was neither an infirmary, clinic, or hospital used for the treatment of all injured employees in near proximity to the workplace nor a person or persons adequately trained to render first aid: On or about December 2, 2024, an employee was exposed to amputation hazards, while performing service and maintenance operations on Conveyor 8 in the Basement, Room 1. The employer did not ensure that a person trained to provide first aid to employees working in an area where there was no infirmary, clinic, or hospital was available in case of severe injury or illness.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1910.147 D
- Issued
- Abate by
- Penalty
- Initial $82757.00 · Current $57931.00 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about December 2, 2024, an employee was exposed to amputation hazards, while performing service and maintenance operations on Conveyor 8 in the Basement, Room 1. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employee from machine servicing hazards.
Recent events (2)
- — I (W) $57931
- — Z (W) $82757
More inspections in this industry (NAICS 424510)
POMEROY, WA—2026-07-01 00:00:00
WA317991893 - POMEROY GRAIN GROWERS INC
ENID, OK—2026-06-30 00:00:00
CONSOLIDATED GRAIN AND BARGE CO.
EDISON, NE—2026-06-30 00:00:00
AG VALLEY COOP
SCIO, OR—2026-06-10 00:00:00
317744473 - BEACON SEED LLC
HEALY, KS—2026-05-29 00:00:00
BARTLETT GRAIN COMPANY, LLC
More inspections in IL
DEERFIELD, IL—2026-07-16 00:00:00
JOHN BURNS CONSTRUCTION COMPANY, LLC
BANNOCKBURN, IL—2026-07-16 00:00:00
BUILDER SERVICES GROUP, INC. DBA CJ INSULATION
BANNOCKBURN, IL—2026-07-16 00:00:00
ROOFING H.P. LLC
HIGHLAND PARK, IL—2026-07-16 00:00:00
UNITED PLUMBING AND DRAIN, INC.
FRANKLIN PARK, IL—2026-07-16 00:00:00
B & M PLASTIC INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347929648.