Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PRECISION METAL CRAFTERS

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of PRECISION METAL CRAFTERS in 220 HUFF AVENUE, SUITE 700, GREENSBURG, PA 15601 (NAICS 332710). OSHA activity number 347951600.

Watch Precision Metal Crafters — free Get an email when a new federal OSHA severe-injury report for Precision Metal Crafters is published. One employer, no account, unsubscribe in one click.
Site address
220 HUFF AVENUE, SUITE 700
City
GREENSBURG
State
PA
ZIP
15601
Mailing
220 HUFF AVENUE, GREENSBURG, PA 15601
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
35
Ownership type
A

5 citations on file for this inspection.

1910.134 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $2979.00 Reduced
29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:   a) In the facility, on or about February 18, 2025 - The employer did not establish a written respiratory protection program that includes procedures for the use of respirators in any work areas where protection from respiratory hazards is required.
Recent events (2)
  • — I (S) $2979
  • — Z (S) $4965

1910.134 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) In the facility, on or about February 18, 2025 - The employer did not provide a medical evaluation to an employee designated as a painter before the employee was required to use the tight-fitting respirator in the workplace.    b) In the facility, on or about December 23, 2024 - The employer did not provide a medical evaluation to employees designated as welders before the tight-fitting respirators were worn voluntarily in the workplace.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):  a) In the facility, on or about February, 18, 2025 - The employer did not ensure an employee designated as a painter passed an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT) prior to using a tight-fitting respirator in the workplace.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.107 B05 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6620.00 · Current $3972.00 Reduced
29 CFR  1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers:  a) In the facility, on or about December 23, 2024 - The interior of the booth utilized for spray finishing was not protected by an automatic sprinkler or other approved automatic extinguishing equipment.
Recent events (2)
  • — I (S) $3972
  • — Z (S) $6620

1910.107 B05 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.107(b)(5)(i): There were no visible gauges, audible alarms or pressure activated devices installed in paint spray booths to indicate or ensure that the required air speed was maintained:   a) In the facility, on or about December 23, 2024 - The employer did not ensure visible gauges, audible alarm or pressure activated devices were installed in the spray booth to indicate or insure the required air velocity is maintained.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View PRECISION METAL CRAFTERS's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347951600.