OSHA Inspection: ZENEMIL CONSULTING INC.

Issued

2025-09-02 00:00:00

Abate by

2025-09-26 00:00:00

Penalty

Initial $9268.00 · Current $6488.00 Reduced

General-duty citation text

29 CFR  1910.178(m)(5)(iii): Powered industrial truck(s), with the operator dismounted and within 25 feet of the truck still in his view, did not have load engaging means fully lowered:  a) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, employees were exposed to a crush by hazard while having their lower body underneath the elevated portion of the forks on Toyota forklift No. 8 that was holding metal sheet as it was being bent by an AccurPress Press break (Model No. 725014).

Issued

2025-09-02 00:00:00

Abate by

2025-09-26 00:00:00

Penalty

Initial $9268.00 · Current $6488.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about March 4, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, an employee was exposed to flying chips, caught by, and amputation hazards while working with a drill press (i.e. Morris Mor- speed drill) that lacked a guard on its rotating chuck and point of operation.  b) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, employees were exposed to an amputation hazard while cutting metal sheets with an AccurPress shear (Model No. 837512, Serial No. 3583) that lacked a guard for its hold downs.

Issued

2025-09-02 00:00:00

Abate by

2025-09-26 00:00:00

Penalty

Initial $9268.00 · Current $6488.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  a) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, employees were exposed to an amputation hazard while cutting metal sheets with an AccurPress shear (Model No. 837512, Serial No. 3583) that lacked a guard at it point of operation.  b) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, employees were exposed to an amputation hazard while bending metal sheets using an AccurPress press break (Model No. 725014) that lacked a guard at its point of operation.

Issued

2025-09-02 00:00:00

Abate by

2025-09-26 00:00:00

Penalty

Initial $3972.00 · Current $2780.00 Reduced

General-duty citation text

29 CFR  1910.305(a)(2)(ix): Lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard:  a) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, a tube light used to illuminate the worktable for a drill press (i.e. Morris Mor- speed drill) was not protected from accidental contact or breakage exposing employees to a struck by hazard.

Issued

2025-09-02 00:00:00

Abate by

2025-09-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.157(c)(1):Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, the employer did not ensure fire extinguishers were identified, thereby exposing employees to possible fire related injuries such as smoke inhalations and burns.

Issued

2025-09-02 00:00:00

Abate by

2025-09-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, employees operating a Toyota forklift without being certified in the safe operation and handling of a powered industrial truck.

Issued

2025-09-02 00:00:00

Abate by

2025-09-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(g) and (h) will be met:  a) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, the employer did not develop and implement a written hazard communication program for protecting an employee who worked with hazardous chemicals, including but not limited to, Rustlick WS-11 Water Soluble Oil.

Issued

2025-09-02 00:00:00

Abate by

2025-09-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) On or about April 3, 2025, at the jobsite located at 3775 NW 81st St., Miami, FL 33147, employees who worked with hazardous chemicals were not effectively trained and informed as they lacked knowledge of the hazards presented by chemicals used.