OSHA Accident Investigation · Summary #221431299
JOHN DEERE DAVENPORT WORKS
DAVENPORT, IA·
Event description
Employee lowering equipment suffers amputation of fingertips
Investigation abstract
At 10:45 a.m. on January 20, 2022, an employee was working for a large was 203.2 mm (8.0 inches). The employee had finished hooking up the loader's parking brake and was getting ready to lower the frame onto the front dolly of the transport cart. The employee had her left foot on the 'down' pedal as she lowered the lift. At the same time, she was using her right hand to align the dolly bearing with the hole in the frame that was being lowered. The employee lowered the frame with the foot pedal as she adjusted the dolly under the frame. The employee's fingers became crushed in between the frame and the transport cart dolly. The fingertips of the middle and ring fingers on the employee's right hand were partially amputated, to the bottom of the nail bed. She was treated and released. She was not hospitalized. international company that manufactured farm and construction machinery. She was working as an assembler on an assembly line in the facility's 884 department. The firm's L-Series utility wheel loaders were being assembled there. She was operating a Southworth lift table, with loader frame dolly G3, in the lift table east location. This was at column AA44. At this station, the utility wheel loader's front frame was loaded onto a transport cart. The lift table ran on three-phase 480 volts AC. It had a capacity of 12,000 lbs. (53.4 kilonewtons). The loader frame shaft diameter was 60 mm (2.4 inches), and the disc diameter
Victim
-
#1 Non-hospitalized injury Age 41 F
- Event type
- 2
Codes shown verbatim from OSHA's accident-investigation database. A human-readable decoder is coming in a future release once the accident_lookup2 dictionary is loaded.