Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,991Records 71,450Employers 85,836Hospitalizations 27,959Amputations 2015-01-01 2025-11-30

OSHA Accident Investigation · Summary #221451933

SEMO MILLING, LLC

Event
Concrete, Crane, Fall, Fall From Elevation, Fall Protection, Grain Bin, PPE Hazard Assessment, Silo
NAICS
311221
Inspection type
Federal Agency
Activity number
#345883755
Employer profile
SEMO MILLING, LLC
Summary number
221451933
Report ID
0729300

Event description

Employee falls and is killed

Investigation abstract

The gravity fed chute/spout was connected to the grain elevator leg to Grain requested the assistance of a crane service. The crane was on site at approximately 4:00 p.m. and conducted a lift test. At approximately 4:30 p.m., two other maintenance employees were lifted up in a man basket by the crane to the north side of chute for inspection and possible repair. At 5:00 p.m., the maintenance employees removed a section of the top plate and began to lower the plate to the employee, when the chute collapsed, subsequently falling. The employee and the chute/spout landed on the concrete ground between Grain Silo #1 and Grain Silo #2. The employee fell 95 feet to his death. The fatality was confirmed by North Scott County EMS. Silo #2. The chutes lower end was attached by bolts to the grain bin lid. The lid rested on top of the grain bin. An employee was standing on the lid on top of Grain Silo #2. The employee was not wearing any PFAS. There was a guardrail system encompassing the top of the grain bin. At approximately 3:00 p.m. on April 6, 2022, the employee removed an observation plate and chute choke indicator to look inside the gravity fed chute, which is located on the lower end of the chute, to find blockage using his phone and flashlight. He sent photos to the maintenance supervisor. At approximately 3:15 p.m., the supervisor

Victim

  1. #1 Fatality Age 25 M

    Event type
    5

Codes shown verbatim from OSHA's accident-investigation database. A human-readable decoder is coming in a future release once the accident_lookup2 dictionary is loaded.