Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31

OSHA Accident Investigation · Summary #221648835

R.C. RETAINING WALLS, INC.

Event
Barge, Boat, Drown, Drowning, Installing, Insufficient Supervision, Laborer, Lack of Work Procedures, Lack of oxygen, Misjudgment, Misjudgment of Hazardous Situation, PPE, PPE Hazard Assessment, Water, Wood Board, Work Surface
NAICS
237990
Inspection type
Federal Agency
Activity number
#347340952
Employer profile
R.C. RETAINING WALLS, INC.
Summary number
221648835
Report ID
0626300
Project type
A
Construction end-use
H

Event description

Employee dies from drowning while building boat dock

Investigation abstract

At 2:15 p.m. on March 8, 2024, an employee working as a construction laborer for the beam. The crew had already stood up the beam on its end, positioned it, and were trying to ensure that it was level before the excavator drove it down into the muddy lake bottom. It was windy, and the beam got away from the crew on the barge as they were attempting to ensure it was level. The beam fell towards the center of the lake and started floating away. Allegedly, the employee immediately reacted since he was already in the water and swam after the beam. He swam approximately 15 feet from the barge when he turned around to return to his original position. The employee slipped under the water. He did come resurface once but appeared to be taking in water and was in obvious need of help. A coworker (the foreman) took off his heavy clothing and jumped in to a retaining walls contractor was working on a crew that had just prepared a assist the employee, using a 2-inch by 6-inch board as a flotation device. The employee could not find the employee, so he returned to the shore. The employee never resurfaced, and his body was later recovered by a search crew using sonar in boats and with the assistance of the game warden. The employee had died due to drowning. site. The crew was getting ready to drive their first 6-inch by 6-inch by 30-foot-long beam into the lakebed approximately 104 feet into the water. The crew had a barge with an excavator in place that they would use to drive the wooden beams into the lake bottom. The beams were being floated out to the crew working on the barge. The employee and a coworker were on the bank placing the beam into the water. The employee worked in waist deep water catching the beam and ensuring it was guided towards the crew on the barge who were to retrieve

Victim

  1. #1 Fatality Age 33 M

    Event type
    14
    Occupation code
    7010

Codes shown verbatim from OSHA's accident-investigation database. A human-readable decoder is coming in a future release once the accident_lookup2 dictionary is loaded.