Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31

OSHA Accident Investigation · Summary #221670540

HOOSIER CRANE SERVICE COMPANY

Event
Abdomen, Arm, Back, Blunt force, Blunt force trauma, Brain, Concrete Floor, Concussion, Contusion, Crane, Fall, Fall From Elevation, Fall Protection, Falling Object, Fracture, Head, Hoist, Hoisting Mechanism, Iron Worker, Lockout, Lockout/Tagout, Machine operator, Maintenance, Material Handling, Misjudgment, Misjudgment of Hazardous Situation, Overhead Crane, Scissor lift, Struck Against, Struck By, Table, Testing, Traumatic, Traumatic Brain Injury, Unsafe Position
NAICS
333923
Inspection type
Federal Agency
Activity number
#347520512
Employer profile
HOOSIER CRANE SERVICE COMPANY
Summary number
221670540
Report ID
0551800

Event description

Employee dies from TBI when scissor lift is struck by crane

Investigation abstract

At 3:15 p.m. on June 1, 2024, an employee working as an iron worker was working time. The employee attempted to test the crane which appeared to run appropriately in the southern direction. But when he tested in the northern direction, it appeared to not stop and struck the scissor lift tipping it over. The employee was in control of the crane at this time. The employee fell approximately 17 feet with the lift and struck the concrete ground below, possibly also striking one or more worktables. The employee sustained head, back, arm and abdominal injuries and died from a traumatic brain injury (TBI). with two coworkers, also, iron workers, replacing the end trucks on an overhead crane. No production work was ongoing in the area at the time. After the two coworkers had replaced the end trucks, the employee was told that the drive motors on the east and west sides of the crane were running in opposite directions. The employee then worked to troubleshoot and check the phasing of the drive motors using a JLG Model 2630 ES Scissor Lift (Serial #: D200137108) to access the crane. The employee completed the work so the drive motors would run in the same direction. The crane was not de-energized or locked out at this

Victim

  1. #1 Fatality Age 19 M

    Event type
    5
    Occupation code
    519

Codes shown verbatim from OSHA's accident-investigation database. A human-readable decoder is coming in a future release once the accident_lookup2 dictionary is loaded.