DALTON, GEORGIA—
Columbia Recycling Corporation
Entangled in other object or equipment · Avulsions, enucleations
Final narrative
An employee was working on a precision cutter that takes yarn off of cones by unraveling it. The employee was pulling cones out of a box and tying new filament to existing filament strands when a knot formed beneath his right hand and caught his right index finger, resulting in an avulsion that required hospitalization.
Similar incidents · Same event type
ATLANTA, GEORGIA—
ATB Renovations, Inc.
On November 9, 2023, an employee was removing plywood from the west face of a basement level buck hoist to prepare to dismantle one of the cabs. When the employee pulled on the plywood, it fell and pulled a rope that partially amputated the employee's thumb.
SAN ANTONIO, TEXAS—
Systems MEC LLC
An employee was holding a rigging line and assisting in the removal of an old light pole from its base. When the load was lifted by a forklift, it shifted. The tag line lifted the employee off the ground and propelled him through the air. The employee landed on the ground and sustained back fractures.
PORT SAINT LUCIE, FLORIDA—
Liberty Tire Recycling, LLC
An employee was performing maintenance on a bucket truck when his right hand became caught in some rope, causing amputations to three fingers down to the first knuckle.
GREELEY, COLORADO—
Hensel Phelps Construction Co.
An employee was conducting a fall rescue demonstration. A 165-pound demonstration dummy was released from a height, putting tension on the lanyard. The employee's left hand, little finger, and thumb were caught in the wire rope lanyard, resulting in a medical amputation of the left little finger as well as lacerations to the left thumb.
MENTONE, TEXAS—
Ace Fluid Solutions
An employee was using a crank and cable to lower a light tower due to windy conditions. The light shaft became hung up and released the tension in the cable, which wrapped around the employee's left hand, resulting in amputations of three fingers.