D & D Machinery Movers Inc
2025-08-30 · SAN ANTONIO, TEXAS
Final narrative
Employees were building a gantry. The injured employee was carrying part of the gantry when their left ring finger was crushed between the gantry and wood. The employee's fingertip was amputated.
Similar incidents (same event type)
Long Management Co.
An employee was removing bathroom tile when his hand was lacerated by a piece of tile.
D & J MACHINERY, INC.
An employee was using a crowbar to loosen a flat bar when the crowbar struck the employee's right eye. The employee was hospitalized and required surgery.
Independence Contract Drilling, Inc.
On August 20, 2025, at 8:00 a.m., two employees were removing a suction module on a mud pump. Three bolts were sheared off and the fourth bolt was frozen, making it difficult to remove the module. The employees used a 5-foot pry bar inserted in the bolt hole to free up the module while a forklift bumped and lifted the module using a two-part sling. When the forklift bumped the module, the module came free, causing the pry bar to jump and pinch the injured employee's left little finger against the pulsation dampener, which resulted in a partial fingertip amputation.
Rosenboom Machine & Tool Inc.
On August 18, 2025, at approximately 7:40 AM, an employee utilized a pocket knife to cut banding on a new bundle of rod material. The knife blade bent during use. The employee was working to straighten the blade on a hard surface when the knife slipped, causing a lacerating their right wrist/forearm. The employee was hospitalized.
Sloan & Company Inc
An employee was kneeling on the ground while fastening metal studs together using a cordless impact gun. While driving a self-drilling framing screw into a metal stud, the drill point portion of the screw snapped off. This caused the impact gun to slip forward and push the remaining portion of the screw through the employee's glove and into his palm.