DENVER, CO ·
OSHA Inspection: HARDWOOD CASE & MILLWORK, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of HARDWOOD CASE & MILLWORK, INC. in 705 SOUTH BROADWAY, DENVER, CO 80209 (NAICS 000000). OSHA activity number 100030865.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARDWOOD CASE & MILLWORK, INC.
- Site address
- 705 SOUTH BROADWAY
- City
- DENVER
- State
- CO
- ZIP
- 80209
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- No inspection (D)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2434
- Employees
- 20
- Ownership type
- Private (A)
Citations
20 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
- Penalty
- Initial $210 · Current $210
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) The hazard of being crushed if overloaded elevator should fall. Among other methods one feasible and acceptable method to correct this hazard is to eq1uip the elevator with a capacity and data plate specifying operating data as required by ANSI A17-1-1984, Rule 207.3(a). b) The hazard of being caught between moving car and hoistway enclosure. Among other methods one feasible and acceptable method to correct this hazard is to have the car door or gate equipped with an electric contact that would prevent movement of the car unless it is in a closed position as required by ANSI A17.1-1984, Rule 210.2(p).
1910.23 C01
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
- Penalty
- Initial $90 · Current $90
1910.37 Q02
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.213 H04
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.24 H
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.106 D03 II
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.212 A05
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.213 C03
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.242 B
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.303 F
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.304 A02
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.304 F05 IVA
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.304 F05 V
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.305 A02 IIIG
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.305 B02
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.305 G01 I
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.1200 E01
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.1200 E01 I
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.1200 F04
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
1910.1200 H
- Issued
- Oct 5, 1988
- Abate by
- Nov 5, 1988
More inspections at Hardwood Case & Millwork, INC.
View Hardwood Case & Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 100030865.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.