BELLE ISLE, FL ·
OSHA Inspection: FINFROCK INDUSTRIES, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of FINFROCK INDUSTRIES, INC. in 1701 MCCOY ROAD, BELLE ISLE, FL 32809 (NAICS 000000). OSHA activity number 101271724.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FINFROCK INDUSTRIES, INC.
- Site address
- 1701 MCCOY ROAD
- City
- BELLE ISLE
- State
- FL
- ZIP
- 32809
- Mailing
- P.O. BOX 17754, ORLANDO, FL 32860
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1771
- Employees
- 7
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
5 citations on file for this inspection.
1926.21 B02
- Issued
- Dec 11, 1987
- Abate by
- Dec 17, 1987
- Penalty
- Initial $630 · Current $630
Recent events (2)
- · F (S) $630.00
- · Z (S) $630.00
5(a)(1)
- Issued
- Dec 11, 1987
- Abate by
- Dec 21, 1987
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Being struck by either a falling prestressed concrete slab which was being repositioned using a hydraulic jack/post shore rig or by the single post shore being used as an extender with the jack to reposition the slab in the event the post shore became displaced and kicked out, on or about 9/10/87. Among other methods, one feasible and acceptable abatement method to correct this hazard is to obtain, or design and fabricate, a lifting device that would not require an extender, and establish written safe operating procedures for its use.
Recent events (2)
- · F (S)
- · Z (S)
1926.700 A
- Issued
- Dec 11, 1987
- Abate by
- Dec 17, 1987
- Penalty
- Initial $630 · Current $630
Recent events (2)
- · F (S) $630.00
- · Z (S) $630.00
1926.700 A
- Issued
- Dec 11, 1987
- Abate by
- Dec 17, 1987
Recent events (2)
- · F (S)
- · Z (S)
1926.20 B02
- Issued
- Dec 11, 1987
- Abate by
- Jan 12, 1988
Recent events (2)
- · F (O)
- · Z (O)
More inspections at Finfrock Industries, INC.
View Finfrock Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 101271724.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.