EAST MOLINE, IL —
OSHA Inspection: JOHN DEERE FOUNDRY EAST MOLINE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JOHN DEERE FOUNDRY EAST MOLINE in HWY #84 & 14TH AVE., EAST MOLINE, IL 61244 (NAICS 000000). OSHA activity number 101316271.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOHN DEERE FOUNDRY EAST MOLINE
- Site address
- HWY #84 & 14TH AVE.
- City
- EAST MOLINE
- State
- IL
- ZIP
- 61244
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3322
- Employees
- 537
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
38 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 14, 1988
- Abate by
- Jun 20, 1988
- Penalty
- Initial $400 · Current $400
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The %% employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: On 4/20/88 an employee performing repair work on a launder located at Bay 4 in the Maintenance Shop used a 1 ton hoist with a clamping device to lift and turn the launder which weighed approximately 4500 lbs. resulting in the release of the load and exposed employee to possible injuries to hands and/or feet. Among other methods, one feasible and acceptable abatement method to correct this hazard would be: 1) Preplan lift(s) by determining weights of objects to be lifted and equipment to be used. 2) Assure the lift(s) do not exceed the posted capacity of the equipment. 3) Involved employees are to be trained in relation to items 1 and 2 above.
1910.22 C
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
- Penalty
- Initial $320 · Current $320
1910.23 A03
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
- Penalty
- Initial $560 · Current $560
1910.23 C01
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
- Penalty
- Initial $560 · Current $560
1910.24 B
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
- Penalty
- Initial $240 · Current $240
1910.132 A
- Issued
- Jun 7, 1988
- Abate by
- Sep 13, 1988
- Penalty
- Initial $480 · Current $480
Recent events (2)
- — I (S) $480.00
- — Z (S) $480.00
1910.133 A01
- Issued
- Jun 7, 1988
- Abate by
- Jul 13, 1988
1910.179 N03 VI
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
- Penalty
- Initial $560 · Current $560
1910.212 A01
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
- Penalty
- Initial $400 · Current $400
1910.212 A03 II
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
- Penalty
- Initial $480 · Current $480
1910.212 A05
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
- Penalty
- Initial $400 · Current $400
Recent events (2)
- — I (S) $400.00
- — Z (S) $400.00
1910.215 A04
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
- Penalty
- Initial $400 · Current $400
1910.215 B09
- Issued
- Jun 7, 1988
- Abate by
- Jul 13, 1988
1910.217 B07 IX
- Issued
- Jun 7, 1988
- Abate by
- Aug 12, 1988
- Penalty
- Initial $480 · Current $480
1910.217 D05
- Issued
- Jun 7, 1988
- Abate by
- Aug 12, 1988
1910.217 E01 II
- Issued
- Jun 7, 1988
- Abate by
- Jun 27, 1988
1910.219 C03
- Issued
- Jun 7, 1988
- Abate by
- Jun 11, 1988
- Penalty
- Initial $400 · Current $400
1910.219 I02
- Issued
- Jun 7, 1988
- Abate by
- Jun 11, 1988
1910.219 D01
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
- Penalty
- Initial $400 · Current $400
1910.219 E01 I
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
1910.219 E03 I
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
1904.2 A
- Issued
- Jun 7, 1988
- Abate by
- Jun 11, 1988
- Penalty
- Initial $80 · Current $80
1904.7
- Issued
- Jun 7, 1988
- Abate by
- Jun 11, 1988
- Penalty
- Initial $80 · Current $80
1910.22 A02
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.23 A08
- Issued
- Jun 7, 1988
- Abate by
- Jul 13, 1988
1910.37 K02
- Issued
- Jun 7, 1988
- Abate by
- Jul 13, 1988
1910.106 E02 IVC
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.157 C01
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.176 B
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.178 A06
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.184 E01
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.219 C02 I
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
1910.219 I02
- Issued
- Jun 7, 1988
- Abate by
- Sep 12, 1988
1910.242 B
- Issued
- Jun 7, 1988
- Abate by
- Jun 20, 1988
1910.303 G02 I
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.305 G01 III
- Issued
- Jun 7, 1988
- Abate by
- Jun 14, 1988
1910.1200 G08
- Issued
- Jun 7, 1988
- Abate by
- Jul 13, 1988
1910.305 B02
- Issued
- Jun 4, 1988
- Abate by
- Jun 14, 1988
More inspections at John Deere Foundry East Moline
View John Deere Foundry East Moline's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 101316271.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.