BOHEMIA, NY ·
OSHA Inspection: B & G MACHINE CO., INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of B & G MACHINE CO., INC. in 60 CROSSWAYS EAST, BOHEMIA, NY 11716 (NAICS 000000). OSHA activity number 101487965.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B & G MACHINE CO., INC.
- Site address
- 60 CROSSWAYS EAST
- City
- BOHEMIA
- State
- NY
- ZIP
- 11716
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (Y)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3535
- Employees
- 29
- Ownership type
- Private (A)
Citations
23 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 10, 1992
- Abate by
- Apr 15, 1992
- Penalty
- Initial $1,000 · Current $500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970. The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being pulled into and crushed by the rotating parts of a pipe threading machine: (a) B & G Machine - Employees were operating a Ridgid 300 pipe threading machine which was activated by a foot switch that would not automatically shut the machine off if its operator was inadvertently caught up in its rotating parts; on or about 12/26/91. ABATEMENT NOTES: Among other methods, one feasible method to reduce this hazard is to establish and enforce adequate safe operating procedures. Procedures such as those stipulated in American National Standard for Portable Pipe Threading Machines (ANSI B208.1-19 82). Elements essential to an acceptable safe operating procedure include at a minimum: 1. Installation of a momentary contact device (deadman foot switch) to control power input to the machine. This device would automatically stop the machine and the rotting pipe if the operator's foot was removed from the foot switch for any reason. 2. Provide training and education to the machine operators concerning all the appropriate procedures for the safe operation and use of this type of machinery.
Recent events (2)
- · I (S) $500.00
- · Z (S) $1000.00
1910.147 C01
- Issued
- Apr 10, 1992
- Abate by
- May 14, 1992
- Penalty
- Initial $1,250 · Current $625 Reduced
Recent events (2)
- · I (S) $625.00
- · Z (S) $1250.00
1910.147 C07
- Issued
- Apr 10, 1992
- Abate by
- May 14, 1992
- Penalty
- Initial $1,250 · Current $625 Reduced
Recent events (2)
- · I (S) $625.00
- · Z (S) $1250.00
1910.157 C04
- Issued
- Apr 10, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.157 E02
- Issued
- Apr 10, 1992
- Abate by
- May 14, 1992
1910.157 G02
- Issued
- Apr 10, 1992
- Abate by
- May 14, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.179 B03
- Issued
- Apr 10, 1992
- Abate by
- Jul 14, 1992
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- · I (S) $500.00
- · Z (S) $1000.00
1910.212 A03 II
- Issued
- Apr 10, 1992
- Abate by
- May 14, 1992
- Penalty
- Initial $1,250 · Current $625 Reduced
Recent events (2)
- · I (S) $625.00
- · Z (S) $1250.00
1910.215 A04
- Issued
- Apr 10, 1992
- Abate by
- Apr 24, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.215 A04
- Issued
- Apr 10, 1992
- Abate by
- Apr 14, 1992
1910.215 B09
- Issued
- Apr 10, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.242 B
- Issued
- Apr 10, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $1,250 · Current $625 Reduced
Recent events (2)
- · I (S) $625.00
- · Z (S) $1250.00
1910.252 B02 III
- Issued
- Apr 10, 1992
- Abate by
- Apr 15, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.303 B02
- Issued
- Apr 10, 1992
- Abate by
- May 17, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.305 B02
- Issued
- Apr 10, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.305 G01 IIIA
- Issued
- Apr 10, 1992
- Abate by
- May 17, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.305 G02 III
- Issued
- Apr 10, 1992
- Abate by
- Apr 24, 1992
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.1200 H
- Issued
- Apr 10, 1992
- Abate by
- May 14, 1992
- Penalty
- Initial $1,250 · Current $625 Reduced
Recent events (2)
- · I (S) $625.00
- · Z (S) $1250.00
1904.2 A
- Issued
- Apr 10, 1992
- Abate by
- Apr 24, 1992
- Penalty
- Initial $1,000
Recent events (2)
- · I (O)
- · Z (O) $1000.00
1904.5 C
- Issued
- Apr 10, 1992
- Abate by
- Apr 24, 1992
1910.20 G01
- Issued
- Apr 10, 1992
- Abate by
- May 14, 1992
1910.20 G02
- Issued
- Apr 10, 1992
- Abate by
- Apr 15, 1992
1910.212 B
- Issued
- Apr 10, 1992
- Abate by
- Apr 15, 1992
More inspections at B & G Machine CO., INC.
View B & G Machine CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 101487965.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.