ALLENWOOD, NJ ·
OSHA Inspection: STANDARD-KEIL HARDWARE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STANDARD-KEIL HARDWARE in HWY 34 & ALLENWOOD ROAD, ALLENWOOD, NJ 08726 (NAICS 000000). OSHA activity number 101504579.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STANDARD-KEIL HARDWARE
- Site address
- HWY 34 & ALLENWOOD ROAD
- City
- ALLENWOOD
- State
- NJ
- ZIP
- 08726
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3429
- Employees
- 248
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
24 citations on file for this inspection.
1910.303 F
- Issued
- Aug 9, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- · I (S) $360.00
- · Z (S) $600.00
5(a)(1)
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $900 · Current $540 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The %% employer did not furnish employment and a place or employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being seriously injured by unintended activation of moving parts of machinery during repair maintenance and adjustment activities due to the lack of an adequate lockout procedure: a) Punch Press Dept - On equipment disconnects for mechanical power presses. On or about 6/19/89. b) Die Cast Dept - On equipment disconnects for mechanical power presses. On or about 6/19/89. One feasible and acceptable method of abatement would be to establish and enforce an adequate plant-wide lockout procedure such as stipulated by ANSI Z244.1-1982. Essential elements of the lockout procedure would include: 1) Open and lockout the main power disconnect on machinery during maintenance, repair and adjustment. 2) Provide each potentially exposed employee working in the area with separate lock and key to be placed on the lockout means; 3) Establish a written lockout policy, including procedures to be followed and training for all affected employees, both maintenance and operational crews; 4) Periodically evaluate the program and strictly enforce all of its provisions.
Recent events (2)
- · I (S) $540.00
- · Z (S) $900.00
1910.22 C
- Issued
- Aug 8, 1989
- Abate by
- Aug 15, 1989
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- · I (S) $360.00
- · Z (S) $600.00
1910.23 C01
- Issued
- Aug 8, 1989
- Abate by
- Aug 15, 1989
- Penalty
- Initial $500 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $500.00
1910.101 B
- Issued
- Aug 8, 1989
- Abate by
- Aug 15, 1989
- Penalty
- Initial $500 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $500.00
1910.132 A
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- · I (S) $360.00
- · Z (S) $600.00
1910.133 A01
- Issued
- Aug 8, 1989
- Abate by
- Aug 15, 1989
- Penalty
- Initial $500 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $500.00
1910.151 C
- Issued
- Aug 8, 1989
- Abate by
- Aug 22, 1989
- Penalty
- Initial $500 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $500.00
1910.176 A
- Issued
- Aug 8, 1989
- Abate by
- Aug 12, 1989
- Penalty
- Initial $700 · Current $420 Reduced
Recent events (2)
- · I (S) $420.00
- · Z (S) $700.00
1910.179 G01 V
- Issued
- Aug 8, 1989
- Abate by
- Sep 15, 1989
- Penalty
- Initial $500 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $500.00
1910.179 J02 III
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
1910.179 J02 IV
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
1910.212 A01
- Issued
- Aug 8, 1989
- Abate by
- Aug 22, 1989
- Penalty
- Initial $700 · Current $420 Reduced
Recent events (2)
- · I (S) $420.00
- · Z (S) $700.00
1910.212 A03 II
- Issued
- Aug 8, 1989
- Abate by
- Aug 22, 1989
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- · I (S) $360.00
- · Z (S) $600.00
1910.217 B08 I
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- · I (S) $360.00
- · Z (S) $600.00
1910.217 C01 I
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- · I (S) $360.00
- · Z (S) $600.00
1910.217 D01 II
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- · I (S) $360.00
- · Z (S) $600.00
1910.217 D09 II
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $500 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $500.00
1910.217 E01 I
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $700 · Current $420 Reduced
Recent events (2)
- · I (S) $420.00
- · Z (S) $700.00
1910.303 G01 II
- Issued
- Aug 8, 1989
- Abate by
- Aug 12, 1989
1910.1200 E01
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
- Penalty
- Initial $800 · Current $480 Reduced
Recent events (2)
- · I (S) $480.00
- · Z (S) $800.00
1910.1200 G01
- Issued
- Aug 8, 1989
- Abate by
- Sep 8, 1989
1910.1200 H
- Issued
- Aug 8, 1989
- Abate by
- Sep 22, 1989
Recent events (2)
- · I (S)
- · Z (S)
1910.37 K02
- Issued
- Aug 8, 1989
- Abate by
- Aug 12, 1989
More inspections in this industry (NAICS 000000)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 101504579.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.