CHILTON, WI —
OSHA Inspection: KAYTEE PRODUCTS INCORPORATED
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of KAYTEE PRODUCTS INCORPORATED in 292 E. GRAND ST., CHILTON, WI 53014 (NAICS 000000). OSHA activity number 101728178.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KAYTEE PRODUCTS INCORPORATED
- Site address
- 292 E. GRAND ST.
- City
- CHILTON
- State
- WI
- ZIP
- 53014
- Mailing
- P. O. BOX 230, CHILTON, WI 53014
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2048
- Employees
- 116
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
23 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
- Penalty
- Initial $640 · Current $200 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Employees entered confined spaces such as grain bins, tanks of plant #1 & #2, and the lower level of plant #1 (where moist was present), for cleaning, maintenance work, disinfecting preparation and to dislodge material. Employees were exposed to potential hazards of asphyxiation and chemical poisoning from oxygen deficiency and toxic gases, including being buried in the material, fumigants, carbon monoxide and/or carbon dioxide. A feasible method of abatement includes, but is not limited to: 1) Written procedures covering a permit system, ventilation, atmospheric testing, standby and emergency procedures, rescue procedures (including notification methods for obtaining additional assistance), and employee training. 2) The completion and posting of a confined space entry permit which requires authorization and approval in writing that specifies the location and type of work to be done and certifies that all existing and potential hazards have been evaluated by a qualified person and necessary protective measures have been taken to ensure the safety of each worker. 3) Mechanical ventilation of the confined space prior to entry and continued ventilation to provide a safe atmosphere, when determined necessary in #2 above. 4) Testing of the atmosphere of the confined space prior to entry and on a regular basis for presence of sufficient oxygen (19.5%) and absence of hazardous levels of toxic gases or vapors, when determined necessary as described in #2 above. 5) Emergency rescue procedures with a requirement that trained personnel are available and are stationed outside the confined space with proper equipment to provide for the rescue of persons entering the space and a system of obtaining additional assistance in an emergency situation (such as an alarm or air horn), when determined necessary as described in #2 above. Such equipment must include a safety harness and life line with provisions for hoisting or pulling employees from the confined space (a boatswains chair the meets the requirements of 29 CFR 1910 Subpart D may also be used), and a means to lower a stretcher from areas only accessible by ladder be readily available. If entry is required for rescue, the rescuing employee must be equipped with an approved air supplied respirator and other appropriate personal protective equipment. 6) Training of any and all employees required to enter the confined spaces. This training shall include procedures required priorto entry and the hazards associated with work in confined spaces.
Recent events (2)
- — F (S) $200.00
- — Z (S) $640.00
1910.272 E02
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (S)
- — Z (S)
1910.272 G01 I
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (S)
- — Z (S)
1910.272 G01 II
- Issued
- Oct 5, 1988
- Abate by
- Dec 7, 1988
Recent events (2)
- — F (S)
- — Z (S)
1910.272 G01 III
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (S)
- — Z (S)
1910.272 G03
- Issued
- Oct 5, 1988
- Abate by
- Nov 7, 1988
Recent events (2)
- — F (S)
- — Z (S)
1910.272 G04
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (S)
- — Z (S)
1910.22 A01
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
- Penalty
- Initial $400
Recent events (2)
- — F (O)
- — Z (S) $400.00
1910.27 B01 II
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
- Penalty
- Initial $320 · Current $300 Reduced
Recent events (2)
- — F (S) $300.00
- — Z (S) $320.00
1910.27 C01
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (S)
- — Z (S)
1910.27 D03
- Issued
- Oct 5, 1988
- Abate by
- Nov 7, 1988
Recent events (2)
- — F (S)
- — Z (S)
1910.212 A01
- Issued
- Oct 5, 1988
- Abate by
- Nov 7, 1988
- Penalty
- Initial $400
Recent events (2)
- — F (O)
- — Z (S) $400.00
1910.212 A05
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
- Penalty
- Initial $320
Recent events (2)
- — F (O)
- — Z (S) $320.00
1910.219 D01
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
- Penalty
- Initial $560 · Current $500 Reduced
Recent events (2)
- — F (S) $500.00
- — Z (S) $560.00
1910.219 E03 I
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (S)
- — Z (S)
1910.219 F03
- Issued
- Oct 5, 1988
- Abate by
- Nov 7, 1988
- Penalty
- Initial $240
Recent events (2)
- — F (O)
- — Z (S) $240.00
1910.304 F04
- Issued
- Oct 5, 1988
- Abate by
- Oct 14, 1988
- Penalty
- Initial $320
Recent events (2)
- — F (O)
- — Z (S) $320.00
1910.307 B
- Issued
- Oct 5, 1988
- Abate by
- Nov 1, 1992
- Penalty
- Initial $560 · Current $500 Reduced
Recent events (2)
- — F (S) $500.00
- — Z (S) $560.00
1910.23 A03
- Issued
- Oct 5, 1988
- Abate by
- Nov 7, 1988
Recent events (2)
- — F (O)
- — Z (O)
1910.242 B
- Issued
- Oct 5, 1988
- Abate by
- Oct 14, 1988
Recent events (2)
- — F (O)
- — Z (O)
1910.305 B01
- Issued
- Oct 5, 1988
- Abate by
- Oct 12, 1988
Recent events (2)
- — F (O)
- — Z (O)
1910.1200 E01
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (O)
- — Z (O)
1910.1200 H
- Issued
- Oct 5, 1988
- Abate by
- Jan 9, 1989
Recent events (2)
- — F (O)
- — Z (O)
More inspections at Kaytee Products Incorporated
View Kaytee Products Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 101728178.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.