SHENANDOAH, PA ·
OSHA Inspection: ATEECO INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ATEECO INCORPORATED in 600 EAST CENTER STREET, SHENANDOAH, PA 17976 (NAICS 000000). OSHA activity number 101767218.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATEECO INCORPORATED
- Site address
- 600 EAST CENTER STREET
- City
- SHENANDOAH
- State
- PA
- ZIP
- 17976
- Mailing
- P. O. BOX 606, SHENANDOAH, PA 17976
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2038
- Employees
- 142
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 2, 1986
- Abate by
- Apr 17, 1986
- Penalty
- Initial $420 · Current $280 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to moving parts by unintended operations of equipment: a) C-Line, Potato Bin Area, potato bin equipment, a positive meansa to lock out power for a rotating screw conveyor in the bin was not provided to protect employees against unintended operation when performing work inside of the bin, March 4, 1986. b) A and B Lines, A and B potato feeder equipment, a positive lock out of power for the rotating screw conveyor at lower position of hopper feed was not provided to protect employees against unintended operation when performing work inside of the hopper, March 4, 1986. Among other methods, a feasible and acceptable abatement method to correct this hazards is: 1) To provide Zero Mechanical State (ZMS), as to provide maximal protection against unexpected mechanical movement of equipment by locking out the electrical and mechanical power to the equipment. In addition, a written program for ZMS should be established with training of all affected personnel.
Recent events (2)
- · I (S) $280.00
- · Z (S) $420.00
1910.23 C01
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
- Penalty
- Initial $420 · Current $280 Reduced
Recent events (2)
- · I (S) $280.00
- · Z (S) $420.00
1910.212 A01
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
- Penalty
- Initial $420 · Current $280 Reduced
Recent events (2)
- · I (S) $280.00
- · Z (S) $420.00
1910.219 D01
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
- Penalty
- Initial $350 · Current $230 Reduced
Recent events (2)
- · I (S) $230.00
- · Z (S) $350.00
1910.219 E01 I
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
1910.219 E03 I
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
1910.219 F01
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
- Penalty
- Initial $280 · Current $190 Reduced
Recent events (2)
- · I (S) $190.00
- · Z (S) $280.00
1910.219 F03
- Issued
- Apr 2, 1986
- Abate by
- Apr 6, 1986
- Penalty
- Initial $350 · Current $230 Reduced
Recent events (2)
- · I (S) $230.00
- · Z (S) $350.00
1910.303 G02 I
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
- Penalty
- Initial $420 · Current $280 Reduced
Recent events (2)
- · I (S) $280.00
- · Z (S) $420.00
1910.22 D01
- Issued
- Apr 2, 1986
- Abate by
- Apr 7, 1986
1910.111 B10 III
- Issued
- Apr 2, 1986
- Abate by
- Apr 17, 1986
1910.132 A
- Issued
- Apr 2, 1986
- Abate by
- Apr 17, 1986
1910.145 C02 I
- Issued
- Apr 2, 1986
- Abate by
- May 1, 1986
Recent events (2)
- · I (O)
- · Z (O)
More inspections at Ateeco Incorporated
View Ateeco Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 101767218.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.