HUDSON, WI —
OSHA Inspection: DURO BAG MFG. CO.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of DURO BAG MFG. CO. in 486 CTY ROAD A, HUDSON, WI 54016 (NAICS 000000). OSHA activity number 102467271.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Duro BAG MFG. CO. — free
Get an email when a new federal OSHA severe-injury report for Duro BAG MFG. CO. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- DURO BAG MFG. CO.
- Site address
- 486 CTY ROAD A
- City
- HUDSON
- State
- WI
- ZIP
- 54016
- Mailing
- P. O. BOX 247, HUDSON, WI 54016
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2674
- Employees
- 120
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
21 citations on file for this inspection.
1910.95 C01
- Issued
- Nov 5, 1990
- Abate by
- Dec 7, 1990
8110
1910.95 D01
- Issued
- Nov 5, 1990
- Abate by
- Dec 7, 1990
8110
1910.95 I03
- Issued
- Nov 5, 1990
- Abate by
- Dec 7, 1990
8110
1910.95 K01
- Issued
- Nov 5, 1990
- Abate by
- Dec 7, 1990
8110
1910.95 L01
- Issued
- Nov 5, 1990
- Abate by
- Dec 7, 1990
8110
5(a)(1)
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
- Penalty
- Initial $720 · Current $720
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Entry into confined spaces, e.g. holding tanks for storing mixed paste on mezzanine, Paste and Ink Department without a confined space entry program on 9/6/90. Among other methods, one feasible and acceptable abatement method to correct these hazards is to establish and enforce an adequate plant confined space entry procedure such as that stipulated by ANSI Z117.1- 1989. American National Standard for Working in Tanks and other Confined Spaces. Essential elements of this confined space entry procedure would include: 1) Hazard identification. Identify and evaluate each hazard of the permit spaces, including determination of severity; 2) Hazard control. Establish and implement the means, procedures and practices by which the permit spaces can be entered safely; 3) Permit system. Establish a written permit system for the proper preparation, issuance and implementation of entry permits; 4) Employee information. Signs shall be posted near permit spaces to notify employees what hazards may be present and that only authorized entrants may enter the permit spaces; 5) Prevention of unauthorized entry. Prevent unauthorized employee entry through such measures as training or by posting signs and barriers, as necessary; 6) Employee training. Train employees so that attendants, authorized entrants and personel authorizing or in charge or entry can work safely in and around the permit space; 7) Equipment. Provide, maintain and ensure the proper use of the equipment necessary for safe entry, including testing, monitoring, communication and personal protective equipment; 8) Rescue. Ensure that the procedures and equipment necessary to rescue entrants from permit spaces are implemented and provided; 9) Protection from external hazards. Ensure that all pedestrian, vehicle or other barriers necessary to protect entrants from external hazards are provided; 10) Duty to other employers. Ensure that, when an employer, such as a contractor, plans to send employees into a permit space which is under the control of another employer (host employer), the host emploer provides the contractor with available information on permit space hazards; on efforts to comply with this standard; and on any other workplace hazards, safety rules and emergency procedures of which the contractor needs to be aware of.
Recent events (2)
- — I (S) $720.00
- — Z (S) $720.00
1910.132 A
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
- Penalty
- Initial $360 · Current $250 Reduced
Recent events (2)
- — I (S) $250.00
- — Z (S) $360.00
1910.133 A01
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C01
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
- Penalty
- Initial $720 · Current $720
Recent events (2)
- — I (S) $720.00
- — Z (S) $720.00
1910.147 C07 IV
- Issued
- Sep 27, 1990
- Abate by
- Oct 9, 1990
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 F05 II
- Issued
- Sep 27, 1990
- Abate by
- Oct 9, 1990
- Penalty
- Initial $450 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $450.00
1910.1200 G01
- Issued
- Sep 27, 1990
- Abate by
- Dec 3, 1990
1910.1200 H
- Issued
- Sep 27, 1990
- Abate by
- Dec 3, 1990
5(a)(1)
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
- Penalty
- Initial $360 · Current $360
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) Entry into confined spaces, e.g. holding tanks for storing mixed paste on mezzanine, Paste and Ink Department without a confined space entry program on 9/6/90. Among other methods, one feasible and acceptable abatement method to correct these hazards is to establish and enforce and adequate plant confined space entry procedure such as that stipulated by ANSI Z117.1- 1989. American National Standard for Working in Tanks and Other Confined Spaces. Essential elements of this confined space entry procedure would include. 1. Hazard indtification. Identify and evaluate each hazard of the permit spaces, including determination of severity; 2. Hazard control. Establish and implement the means, procedures and practices by which the permit spaces can be entered safely; 3. Permit system. Establish a written permit system for the proper preparation, issuance and implementation of entry permits. 4. Employee information. Signs shall be posted near permit spaces to notify employees what hazards may be present and that only authorized entrants may enter the permit spaces; 5. Prevention of unauthorized entry. Prevent unauthorized employee entry through such measures as training or by posting signs and barriers , as necessary; 6. Employee training. Train employees so that attendants, authorized entrants and personel authorizing or in charge of entry can work safely in and around the permit space; 7. Equipment. Provide, maintain and ensure the proper use of the equipment necessary for safe entry, including testing, monitoring, communication and personal protective equipment. 8. Rescue. Ensure that the procedures and equipment necessary to rescue entrants from permit spaces are implemented and provided; 9. Protection from external hazards. Ensure that all pedestrian, vehicle or other barriers necessary to protect entrants from external hazards are provided; 10. Duty to other employers. Ensure that, when an employer, such as a contractor, plans to send employees into a permit space which is under the control of another employer (host employer), the host employer provides the contractor with available information on permit space hazards; on efforts to comply wiht this standard; and on any other workplace hazards, safety rules and emergency procedures of which the contractor needs to be aware of.
1910.147 C01
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
1910.147 C07 IV
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
1904.2 A
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
Recent events (2)
- — I (O)
- — Z (O)
1904.5 B
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
Recent events (2)
- — I (O)
- — Z (O)
1904.5 C
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
Recent events (2)
- — I (O)
- — Z (O)
1910.134 B01
- Issued
- Sep 27, 1990
- Abate by
- Oct 31, 1990
1910.157 D03 I
- Issued
- Sep 27, 1990
- Abate by
- Oct 1, 1990
More inspections at Duro BAG MFG. CO.
Jul 18, 2007
RICHMOND, VA
Oct 25, 2005
RICHMOND, VA
Aug 25, 1992
COVINGTON, KY
Sep 7, 1990
HUDSON, WI
Dec 17, 1987
WALTON, KY
View Duro BAG MFG. CO.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
Jan 5, 2012
Bruce D. Bowman · SCHENECTADY, NY
Jan 25, 2005
KGC, INC. · BILLINGS, MT
Dec 31, 2002
Rockaway Borough DPW · ROCKAWAY, NJ
Dec 31, 2002
Harry Brickey DBA a. Brickey Ceiling Company · FOREST CITY, NC
Dec 31, 2002
Sudden Bond Industries · EDGERTON, KS
More inspections in WI
Jul 17, 2026
PTS Contractors, INC. · GREEN BAY, WI
Jul 16, 2026
Miron Construction CO. INC. · WAUSAU, WI
Jul 15, 2026
Wabash National Services, L.P. · ELROY, WI
Jul 15, 2026
Kings Superior Construction LLC · SUSSEX, WI
Jul 15, 2026
Teronomy Builders, INC. · DELAVAN, WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102467271.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.