Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RASMUSSEN MILLWORK, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RASMUSSEN MILLWORK, INC. in 501 S. MAIN ST., LUCK, WI 54853 (NAICS 000000). OSHA activity number 102470770.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rasmussen Millwork, INC. — free Get an email when a new federal OSHA severe-injury report for Rasmussen Millwork, INC. is published. One employer, no account, unsubscribe in one click.
Site address
501 S. MAIN ST.
City
LUCK
State
WI
ZIP
54853
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
2431
Employees
88
Ownership type
A
Industry flags
Manufacturing safety.

10 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993
Penalty
Initial $3,500 · Current $3,500
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not furnish employment and a place of employment which
were free from recognized hazards that were causing or likely to cause
death or serious physical harm to employees in that employees were
exposed to:
(a) Confined space entry hazard(s), such as but not limited
to, the sawdust/shaving silo(s) where the potential hazards
could be:
1) flours of wood dust exceeding permissible levels,
2) fire/explosion hazard from air suspended wood dust,
3) oxygen deficiency hazard from wet sawdust,
4) engulfment.
Among other methods, one feasible and acceptable abatement method to
correct these hazards is to establish and enforce an adequate plant
confined space entry procedure such as that stipulated by ANSI
Z117.11989.
American National Standard for Working in Tanks and Other Confined
Spaces.  Essential elements of this confined space entry procedure would
include:
1.     Hazard identification - Identify and evaluate each hazard of the
permit spaces including determination of severity;
2.     Hazard control - Establish and implement the means, procedures, and
practices by which the permit spaces can be entered safely;
3.     Permit system - Establish a written permit system for the proper
preparation, issuance, and implementation of entry permits;
4.     Employee information - Signs shall be posted near permit spaces to
notify employees that hazards may be present and that only authorized
entrants may enter the permit spaces;
5.     Prevention of unauthorized entry - Prevent unauthorized employee
entry through such measures as training or by posting signs and barriers
as
necessary;
6.     Employee training - Train employees so that attendants, authorized
entrants and personnel authorizing or in charge of entry can work safely
in
and around the permit space;
7.     Equipment - Provide, maintain and ensure the proper use of the
equipment necessary for safe entry, including testing, monitoring,
communication and personal protective equipment;
8.     Rescue - Ensure that the procedures and equipment necessary to
rescue entrants from permit spaces are implemented and provided;
9.     Protection from external hazards - Ensure that all pedestrian
vehicle or other barriers necessary to protect entrants from external
hazards are provided;
10.    Duty to other employers - Ensure that when an employer such as a
contractor plans to send employees into a permit space which is under the
control of another employer (host employer) the host employer provides the
contractor with all available information on permit space hazards; on
efforts to comply with this standard; and on any other workplace hazards,
safety rules and emergency procedures of which the contractor needs to be
aware of.

1910.147 C04 II

Serious Gravity 10 1 instance 10 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993
Penalty
Initial $3,500 · Current $3,500

1910.147 C07 I

Serious Gravity 10 2 instances 10 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993

1910.147 C07 IV

Serious Gravity 10 1 instance 10 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993

1910.147 D04 I

Serious Gravity 10 1 instance 10 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993

1910.212 A01

Serious Gravity 01 1 instance 2 exposed
Issued
Apr 9, 1993
Abate by
Apr 26, 1993
Penalty
Initial $825 · Current $825

1910.213 A11

Serious Gravity 02 1 instance 2 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993
Penalty
Initial $1,100 · Current $1,100

1910.304 F04

Serious Gravity 02 1 instance 2 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993

1910.219 F03

Serious Gravity 01 1 instance 4 exposed
Issued
Apr 9, 1993
Abate by
Apr 26, 1993
Penalty
Initial $825 · Current $825

1910.1200 E01 I

Other-than-serious Gravity 01 1 instance 88 exposed
Issued
Apr 9, 1993
Abate by
May 12, 1993

View Rasmussen Millwork, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102470770.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.