EAST MOLINE, IL ·
OSHA Inspection: J.I. CASE CO.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of J.I. CASE CO. in 1100 3RD ST., EAST MOLINE, IL 61244 (NAICS 000000). OSHA activity number 102500311.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J.I. CASE CO.
- Site address
- 1100 3RD ST.
- City
- EAST MOLINE
- State
- IL
- ZIP
- 61244
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (Y)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3523
- Employees
- 1600
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
29 citations on file for this inspection.
1910.106 E02 IVA
- Issued
- Jul 20, 1990
- Abate by
- Jul 27, 1990
- Penalty
- Initial $400 · Current $400
1910.106 E02 IVD
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $300 · Current $300
1910.107 B05 I
- Issued
- Jul 20, 1990
- Abate by
- Aug 6, 1990
- Penalty
- Initial $500 · Current $500
1910.108 G06 I
- Issued
- Jul 20, 1990
- Abate by
- Jul 27, 1990
- Penalty
- Initial $500 · Current $500
1910.133 A01
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $500 · Current $500
1910.151 C
- Issued
- Jul 20, 1990
- Abate by
- Jul 27, 1990
- Penalty
- Initial $500 · Current $500
1910.212 A01
- Issued
- Jul 20, 1990
- Abate by
- Sep 30, 1990
- Penalty
- Initial $500 · Current $500
Recent events (2)
- · I (S) $500.00
- · Z (S) $500.00
1910.212 A03 II
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $600 · Current $600
Recent events (2)
- · I (S) $600.00
- · Z (S) $600.00
1910.213 C01
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $600 · Current $600
1910.213 C02
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
1910.213 C03
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
1910.213 H01
- Issued
- Jul 20, 1990
- Abate by
- Aug 20, 1990
- Penalty
- Initial $600 · Current $600
1910.215 A02
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $400 · Current $400
1910.217 B07 II
- Issued
- Jul 20, 1990
- Abate by
- Aug 20, 1990
- Penalty
- Initial $400 · Current $400
1910.219 C02
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $500 · Current $500
1910.242 B
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $500 · Current $500
1910.243 C03
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $400 · Current $400
1910.304 F04
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $400 · Current $400
1910.305 B01
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $700 · Current $700
1910.305 B02
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $700 · Current $700
1910.1200 F05 I
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
- Penalty
- Initial $500 · Current $500
1910.1200 F05 II
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
5(a)(1)
- Issued
- Jul 20, 1990
- Abate by
- Aug 3, 1990
- Penalty
- Initial $7,000 · Current $4,000 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: The hazard of amputation of hands and/or fingers in that employees were not trained and instructed in the safe operation of press brakes and their point of operation guarding devices, as stipulated by ANSI B11.301982. In Department 47, operators did not know the light curtain is only to be "muted" once the die is within a maximum of 1/4 inch of the workpiece. Among other methods, a feasible and acceptable abatement method to correct this hazard is: 1) The employer shall instruct and train the operator in the safe method of work before starting work on any operation. 2) The employer shall ensure by adequate supervision that correct operating procedures are being followed. Disclaimers: 1) The employer is not limited to the abatement methods suggested by OSHA. 2) The methods explained are general and may not be effective in all cases. 3) The employer is responsible for selecting and carrying out an appropriate abatement method.
Recent events (2)
- · I (S) $4000.00
- · Z (W) $7000.00
1910.212 A03 II
- Issued
- Jul 20, 1990
- Abate by
- Aug 3, 1990
Recent events (2)
- · I (S)
- · Z (W)
1910.22 A01
- Issued
- Jul 20, 1990
- Abate by
- Jul 23, 1990
1910.37 Q01
- Issued
- Jul 20, 1990
- Abate by
- Aug 3, 1990
1910.107 B05 IV
- Issued
- Jul 20, 1990
- Abate by
- Aug 3, 1990
1910.147 C04 I
- Issued
- Jul 20, 1990
- Abate by
- Aug 20, 1990
Recent events (2)
- · I (O)
- · Z (O)
1910.184 E01
- Issued
- Jul 20, 1990
- Abate by
- Aug 20, 1990
More inspections at J.I. Case CO.
View J.I. Case CO.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 102500311.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.