TAYLORVILLE, IL —
OSHA Inspection: MCCABE PACKING CO.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of MCCABE PACKING CO. in ROUTE 29 WEST, TAYLORVILLE, IL 62568 (NAICS 000000). OSHA activity number 102505468.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MCCABE PACKING CO.
- Site address
- ROUTE 29 WEST
- City
- TAYLORVILLE
- State
- IL
- ZIP
- 62568
- Mailing
- P.O. BOX 9, TAYLORVILLE, IL 62568
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2011
- Employees
- 25
- Ownership type
- A
Citations
21 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 7, 1990
- Abate by
- Mar 10, 1990
- Penalty
- Initial $490 · Current $375 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to to the hazards of: 2nd and 3rd degree burns from coming in contact with hot water and concussions and/or lacerations from being struck by highly pressurized hoses, because the hose in the gut room and another on the kill floor floor were not equipped with constant pressure switches. The hoses were used in the cleaning process at McCabe Packing Company. Among other methods, one feasible and acceptable abatement method to correct this hazard would be to install constant pressure switches on all hoses used in the cleaning process with the following criteria: 1) The constant pressure switches should be maintained in a proper operating condition and should be checked periodically to determine if they are working properly. 2) Monitoring should be done by management to see that employees are not bypassing the system. 3) Employees should also be trained in the hazards associated with high pressure hoses and hot water. DISCLAIMERS: a) The employer is not limited to the abatement methods suggested by OSHA. b) The methods explained are general and may not be effective in all cases. c) The employer is responsible for selecting and carrying out an appropriate abatement method.
Recent events (2)
- — I (S) $375.00
- — Z (S) $490.00
1910.95 D01
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
- Penalty
- Initial $810 · Current $460 Reduced
Recent events (2)
- — I (S) $460.00
- — Z (S) $810.00
1910.95 I05
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
1910.95 G05 IV
- Issued
- Feb 21, 1990
- Abate by
- Mar 27, 1990
1910.95 H01
- Issued
- Feb 21, 1990
- Abate by
- Mar 27, 1990
1910.95 H04
- Issued
- Feb 21, 1990
- Abate by
- Mar 27, 1990
1910.95 I03
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
1910.95 K03 I
- Issued
- Feb 21, 1990
- Abate by
- Mar 27, 1990
1910.95 K03 III
- Issued
- Feb 21, 1990
- Abate by
- Mar 27, 1990
1910.95 L01
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
1910.132 A
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
- Penalty
- Initial $900 · Current $450 Reduced
Recent events (2)
- — I (R) $450.00
- — Z (R) $900.00
1910.305 E01
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
- Penalty
- Initial $180 · Current $180
1903.2 A01
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
1904.2 A02
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
1910.20 G01 I
- Issued
- Feb 21, 1990
- Abate by
- Mar 9, 1990
1910.20 G01 II
- Issued
- Feb 21, 1990
- Abate by
- Mar 9, 1990
1910.20 G01 III
- Issued
- Feb 21, 1990
- Abate by
- Mar 9, 1990
1910.20 G02
- Issued
- Feb 21, 1990
- Abate by
- Mar 9, 1990
1910.23 A08
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
1910.305 B01
- Issued
- Feb 21, 1990
- Abate by
- Mar 27, 1990
1910.305 G02 II
- Issued
- Feb 21, 1990
- Abate by
- Feb 26, 1990
More inspections at Mccabe Packing CO.
View Mccabe Packing CO.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102505468.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.