LAKE MILLS, WI —
OSHA Inspection: MPI INTERNATIONAL INC. - WISCONSIN MACHINING DIV.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of MPI INTERNATIONAL INC. - WISCONSIN MACHINING DIV. in 528 E. TYRANENA RD., LAKE MILLS, WI 53551 (NAICS 000000). OSHA activity number 102509171.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MPI INTERNATIONAL INC. - WISCONSIN MACHINING DIV.
- Site address
- 528 E. TYRANENA RD.
- City
- LAKE MILLS
- State
- WI
- ZIP
- 53551
- Mailing
- P.O. BOX 4, LAKE MILLS, WI 53551
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3599
- Employees
- 79
- Ownership type
- A
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 17, 1990
- Abate by
- Nov 20, 1990
- Penalty
- Initial $720 · Current $500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of asphyxiation: Employee(s) entering coolant tower tank. Among other methods one feasible and acceptable method to correct these hazards is to establish and enforce an adequate plant confined space entry procedure such as that stipulated by ANSI Z117.1-1977, American National Standard for Working in Tanks and Other Confined Spaces. Essential elements of this confined space entry procedure would include: 1) Hazard identification - identify and evaluate each hazard of the permit spaces including determination of severity. 2) Hazard control - establish and implement the means, procedures and practices by which the permit spaces can be entered safely. 3) Permit system - establish a written permit system for the proper preparation, issuance and implementation of entry permits. 4) Employee information - signs shall be posted near permit spaces to notify employees that hazards may be present and that only authorized entrants may enter the permit spaces. 5) Prevention of unauthorized entry - prevent unauthorized employee entry through such measures as training or by posting signs and barriers as necessary. 6) Employee training - train employees so that attendants, authorized entrants and personnel authorizing or in charge of entry can work safely in and around the permit space: 7) Equipment - provide, maintain and ensure the proper use of the equipment necessary for safe entry (safety harness and lifeline, ventilate by approximately 6 inch diameter hose to tank bottom with blower); including testing, monitoring (continuous oxygen with alarm) communication and personal protective equipment. 8) Rescue - ensure that the procedure and quipment necessary to rescue entrants from permit spaces are implemented and provided. 9) Protectiion from external hazard - ensure that all pedestrian vehicle or other barrier necessary to protect entrants from external hazards are provided. 10) Duty to other employers - ensure that when an employer such as a contractor plans to send employees (host employer) the host employer provides the contractor with all available information on permit space hazards; on efforts to comply with this standard and on any other workplace hazards safety rules and emergency procedures of which the contractor needs to be aware of.
Recent events (2)
- — I (S) $500.00
- — Z (S) $720.00
1910.120 Q01
- Issued
- Aug 17, 1990
- Abate by
- Oct 7, 1990
- Penalty
- Initial $400 · Current $250 Reduced
Recent events (2)
- — I (S) $250.00
- — Z (S) $400.00
1910.141 C01
- Issued
- Aug 17, 1990
- Abate by
- Oct 7, 1990
- Penalty
- Initial $320 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $320.00
1910.151 C
- Issued
- Aug 17, 1990
- Abate by
- Oct 7, 1990
- Penalty
- Initial $160 · Current $110 Reduced
Recent events (2)
- — I (S) $110.00
- — Z (S) $160.00
1910.212 A01
- Issued
- Aug 17, 1990
- Abate by
- Aug 19, 1990
- Penalty
- Initial $720 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $720.00
1910.212 A03 II
- Issued
- Aug 17, 1990
- Abate by
- Aug 27, 1990
- Penalty
- Initial $400 · Current $230 Reduced
Recent events (2)
- — I (S) $230.00
- — Z (S) $400.00
1910.1200 E01
- Issued
- Aug 17, 1990
- Abate by
- Oct 20, 1990
- Penalty
- Initial $720 · Current $500 Reduced
Recent events (2)
- — I (R) $500.00
- — Z (R) $720.00
1910.1200 E01 I
- Issued
- Aug 17, 1990
- Abate by
- Oct 20, 1990
Recent events (2)
- — I (R)
- — Z (R)
1910.1200 F08
- Issued
- Aug 17, 1990
- Abate by
- Aug 20, 1990
Recent events (2)
- — I (R)
- — Z (R)
1910.1200 G08
- Issued
- Aug 17, 1990
- Abate by
- Oct 20, 1990
Recent events (2)
- — I (R)
- — Z (R)
1910.1200 H
- Issued
- Aug 17, 1990
- Abate by
- Oct 20, 1990
- Penalty
- Initial $360 · Current $280 Reduced
Recent events (2)
- — I (R) $280.00
- — Z (R) $360.00
1904.5 A
- Issued
- Aug 17, 1990
- Abate by
- Aug 27, 1990
- Penalty
- Initial $140 · Current $100 Reduced
Recent events (2)
- — I (O) $100.00
- — Z (O) $140.00
1904.5 B
- Issued
- Aug 17, 1990
- Abate by
- Aug 27, 1990
Recent events (2)
- — I (O)
- — Z (O)
1910.95 D03
- Issued
- Aug 17, 1990
- Abate by
- Oct 16, 1990
More inspections at MPI International INC. - Wisconsin Machining DIV.
View MPI International INC. - Wisconsin Machining DIV.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102509171.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.