LAKE MILLS, WI —
OSHA Inspection: APV CREPACO, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of APV CREPACO, INC. in 100 S. CP AVE., LAKE MILLS, WI 53551 (NAICS 000000). OSHA activity number 102513371.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- APV CREPACO, INC.
- Site address
- 100 S. CP AVE.
- City
- LAKE MILLS
- State
- WI
- ZIP
- 53551
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3556
- Employees
- 825
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 30, 1990
- Abate by
- Jun 15, 1991
- Penalty
- Initial $800 · Current $400 Reduced
General-duty citation text
Section 5(a)(1) of the Occuaptional Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Employees entering tanks under construction for grinding and final clean-up work were exposed to oxygen deficient and/or toxic atmospheres. Among other methods, one feasible and acceptable method to correct these hazards is to establish and enforce an adequate plant confined space entry procedure such as that stipulated by ANSI Z117.1-1977, American National Standard for Working in Tanks and Other Confined Spaces. Essential elements of this confined space entry procedure wouldinclude: 1) Written procedures covering a permit system, isolation, ventilation, atmospheric testing, rescue procedures and employee training. 2) The completion and posting of a confined spaces entry permit which requires authorization and approval in writing that specifies the location and type of work to be done and certifies that all existing and potential hazards have been evaluated by a qualified person and necessary protective measures have been taken to ensure the safety of each worker. 3) Isolation of the confined space to preclude the energy of hazardous materials and/or activation of energy sources (e.g. electrical, mechanical, hydraulic, etc.). Methods which can be used to prevent the entry of hazardous materials or closing and locking two valves of piping leading to the confined space and locking open a drain valve leading to the atmosphere between the two closed valves (double block & bleed). Methods which can be used to prevent activation of energy sources affecting the confined space include: locking out electrical line switches to equipmnet controlling moving hazards, dissipating stored energy in capcitors, air, steam, water and other pressure lines and blocking or repositing springs, elevated machine members and rotating flywheels to prevent the release of stored energy. 4) Mechanical ventilation of the confined space prior to entry and continued ventilation to provide a safe atmosphere, when determined necessary as described in (2) above. 5) Testing the atmosphere of the confined space prior to entry and on a regular basis for the presence of sufficient oxygen (19.5% or greater) and absence of hazardous levels of toxic, flammable or combustible gases or vapors, when determined necessary as described in (2) above. 6) Emergency rescue procedures with a requirement that trained personnel are available and stationed outside the confined space with proper equipment to provide for rescue of person(s) entering the space. Such equipment must include safety harness(es) and lifeline(s) with provisions for hoisting employees from the confined space. If entry is required for rescue, the rescuing employee(s) must be equipped with approved supplied air respiratory equipment with escape provisions or self-contained breathing apparatus (SCBA) plus other appropriate personal protective equipment. 7) Training of any and all employees required to enter the confined spaces. This training shall include procedures required prior to entry, the hazards associated with work in confined spaces as well as emergency rescue.
Recent events (2)
- — R (S) $400.00
- — Z (S) $800.00
1904.2 A
- Issued
- Mar 30, 1990
- Abate by
- Apr 30, 1990
- Penalty
- Initial $700 · Current $700
Recent events (2)
- — R (S) $700.00
- — Z (S) $700.00
1904.4
- Issued
- Mar 30, 1990
- Abate by
- Apr 30, 1990
Recent events (2)
- — R (S)
- — Z (S)
1910.95 G08 IIC
- Issued
- Mar 30, 1990
- Abate by
- Apr 30, 1990
8110
Recent events (2)
- — R (S)
- — Z (S)
1910.252 B04 I
- Issued
- Mar 30, 1990
- Abate by
- Jun 15, 1991
- Penalty
- Initial $800 · Current $400 Reduced
Recent events (2)
- — R (S) $400.00
- — Z (S) $800.00
1910.252 E04 IV
- Issued
- Mar 30, 1990
- Abate by
- Jun 15, 1991
- Penalty
- Initial $8,000 · Current $6,000 Reduced
Recent events (2)
- — R (S) $6000.00
- — Z (W) $8000.00
1910.252 F02 IC
- Issued
- Mar 30, 1990
- Abate by
- Jun 15, 1991
- Penalty
- Initial $8,000 · Current $6,000 Reduced
Recent events (2)
- — R (S) $6000.00
- — Z (W) $8000.00
1910.20 G01 I
- Issued
- Mar 30, 1990
- Abate by
- Apr 13, 1990
1910.20 G01 II
- Issued
- Mar 30, 1990
- Abate by
- Apr 13, 1990
1910.20 G01 III
- Issued
- Mar 30, 1990
- Abate by
- Apr 13, 1990
1910.107 B10
- Issued
- Mar 30, 1990
- Abate by
- Apr 30, 1990
1910.107 G01
- Issued
- Mar 30, 1990
- Abate by
- Apr 30, 1990
1910.134 A02
- Issued
- Mar 30, 1990
- Abate by
- May 29, 1990
1910.134 E05 I
- Issued
- Mar 30, 1990
- Abate by
- May 29, 1990
1910.147 C01
- Issued
- Mar 30, 1990
- Abate by
- Apr 30, 1990
More inspections at APV Crepaco, INC.
View APV Crepaco, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102513371.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.