QUARRYVILLE, PA —
OSHA Inspection: ADAMSON COMPANY, INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ADAMSON COMPANY, INCORPORATED in 2318 BEAVER VALLEY HIGHWAY, QUARRYVILLE, PA 17566 (NAICS 000000). OSHA activity number 102599628.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADAMSON COMPANY, INCORPORATED
- Site address
- 2318 BEAVER VALLEY HIGHWAY
- City
- QUARRYVILLE
- State
- PA
- ZIP
- 17566
- Mailing
- P.O. BOX 67, QUARRYVILLE, PA 17566
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3443
- Employees
- 14
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
- Penalty
- Initial $640 · Current $640
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to potential air contaminants and oxygen deficiency hazards while welding the inside seams of steel tanks: A) Small Tank Line in Building - Employees welding inside of the tanks, on or about June 19, 1990. Among other methods, one feasible and acceptable abatement method to correct this hazard is... A) Implement a confined space entry procedure containing the following requirements: 1) Instruction as to the nature of the hazards involved and necessary precautions to be taken relative to confined space entry. 2) Posting of written confined space entry procedures adjacent to the pi pits, tanks, vessels, or other confined space areas which may be entered. 3) Use of cleaning, purging and ventilating procedures to remove sludge and other residue prior to confined space entry. 4) Implementation of established lockout and isolation procedures, where applicable, and issuance of a proper entry permit prior to confined space entry. 5) Ise of atmospheric testing procedures to determine the presence of hazardous air contaminants and potential oxygen deficiency prior to entry into confined space. 6) Where it has been determined that the confined space contains a hazardous air contaminant level and/or an oxygen deficiency, use of mechanically induced ventilation in the confined space before entry and during occupancy and/or use of respiratory protective equipment which provides adequate protection against the hazard(s) encountered. 7) Use of appropriate protection clothing, where applicable. 8) Implementation of periodic training sessions relative to confined space entry, rescue and first aid procedures.
1910.252 B04 IV
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
1910.252 B04 IV
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
5(a)(1)
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
- Penalty
- Initial $560 · Current $560
1910.23 C01
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
- Penalty
- Initial $320 · Current $320
1910.212 A01
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
- Penalty
- Initial $320 · Current $320
1910.212 A03 II
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
- Penalty
- Initial $320 · Current $320
1910.305 B02
- Issued
- Oct 5, 1990
- Abate by
- Oct 15, 1990
- Penalty
- Initial $480 · Current $480
1910.147 C01
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
1910.184 E02 II
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
1910.184 E07 I
- Issued
- Oct 5, 1990
- Abate by
- Nov 4, 1990
1910.305 G01 III
- Issued
- Oct 5, 1990
- Abate by
- Oct 25, 1990
More inspections at Adamson Company, Incorporated
View Adamson Company, Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102599628.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.