MEDFORD, WI —
OSHA Inspection: HURD MILLWORK CO., INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of HURD MILLWORK CO., INC. in 520 S. WHELEN AVENUE, MEDFORD, WI 54451 (NAICS 000000). OSHA activity number 102616109.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HURD MILLWORK CO., INC.
- Site address
- 520 S. WHELEN AVENUE
- City
- MEDFORD
- State
- WI
- ZIP
- 54451
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2431
- Employees
- 430
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
11 citations on file for this inspection.
1910.1200 H
- Issued
- Jan 19, 1990
- Abate by
- Feb 5, 1990
5(a)(1)
- Issued
- Jan 5, 1990
- Abate by
- Feb 8, 1990
- Penalty
- Initial $630 · Current $450 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) Building 2, employees were exposed to potential asphxiation due to oxygen deficiency or toxic atmosphere when entering confined spaces, e.g. performing cleaning work in a dip tank and general visits in the pit around the "new" dip tank (all confined spaces) Methods of abatement feasible and acceptable are: 1) Hazard identification. Identify and evaluate each hazard of the permit spaces, including determination of severity; 2) Hazard control. Establish and implement the means, procedures and practices by which the permit spaces can be entered safely: 3) Permit system. Establish a written permit system for the proper preparation, issuance and implementation of entry permits; 4) Employee information. Signs shall be posted near permit spaces to notify employees what hazards may be present and that only authorized entrants and personnel authorizing or in charge of entry can work safely in and around the permit space; 5) Prevention of unauthorized entry. Prevent unauthorized employee entry through such measures as training or by posting signs and barriers as necessary; 6) Employee training. Train employees so that attendants, authorized entrants and personnel authorizing or in charge of entry can work safely in and around the permit space; 7) Equipment. Provide, maintain and ensure the proper use of the equipment necessary for safe entry, including testing, monitoring, communication and personal protective equipment. 8) Rescue. Ensure that the procedures and equipment necessary to rescue entrants from permit spaces are implemented and provided; 9) Protection from external hazards. Ensure that all pedestrian, vehicle or other barriers necessary to protect entrants from external hazards are provided; 10) Duty to other employers. Ensure that, when an employer, such as a contractor, plans to send employees into a permit space which is under the control of another employer (host employer), the host employer provides the contractor with all available information on permit space hazards; on efforts to comply with this standard; and on any other workplace hazards, safety rules and emergency procedures of which the contractor needs to be aware of.
Recent events (2)
- — I (S) $450.00
- — Z (S) $630.00
1910.24 B
- Issued
- Jan 5, 1990
- Abate by
- Jan 9, 1990
- Penalty
- Initial $540 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $540.00
1910.132 A
- Issued
- Jan 5, 1990
- Abate by
- Jan 23, 1990
- Penalty
- Initial $540 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $540.00
1910.212 A03 II
- Issued
- Jan 5, 1990
- Abate by
- Feb 8, 1990
- Penalty
- Initial $540 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $540.00
1910.219 F03
- Issued
- Jan 5, 1990
- Abate by
- Jan 9, 1990
- Penalty
- Initial $540 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $540.00
1910.134 B01
- Issued
- Jan 5, 1990
- Abate by
- Feb 8, 1990
1910.1200 E01 II
- Issued
- Jan 5, 1990
- Abate by
- Feb 8, 1990
1910.1200 E01 III
- Issued
- Jan 5, 1990
- Abate by
- Feb 8, 1990
1910.1200 F05 I
- Issued
- Jan 5, 1990
- Abate by
- Jan 16, 1990
1910.1200 F05 II
- Issued
- Jan 5, 1990
- Abate by
- Jan 16, 1990
More inspections at Hurd Millwork CO., INC.
View Hurd Millwork CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102616109.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.