HILL CITY, SD ·
OSHA Inspection: ROTH LOGGING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ROTH LOGGING in MERRIT TIMBER SALE, HILL CITY, SD 57745 (NAICS 000000). OSHA activity number 102797826.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROTH LOGGING
- Site address
- MERRIT TIMBER SALE
- City
- HILL CITY
- State
- SD
- ZIP
- 57745
- Mailing
- ROUTE 1, 21 HAY CREEK ROAD, ALADDIN, WY 82710
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2411
- Employees
- 6
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 17, 1994
- Abate by
- Aug 22, 1994
- Penalty
- Initial $1,500 · Current $750 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) The hazard of being struck by trees that were not guided safely during their fall. On 08/16/94 while falling timber, sawyers at the Merrit Timber Sale were cutting the necessary holding wood which could cause the trees to prematurely twist from the stump. Back cuts were even with the undercuts (matchcut) which would not prevent the tree from kicking back over the stump. Among others, one feasible and acceptable abatement method to correct this hazard is to establish a positive method that will prevent cutting of the holding wood so that the tree can be safely guided during its fall. Such positive methods shall include undercuts deep enough to guide the tree, back cuts level as possible and always above the upper cut of the undercut.
Recent events (2)
- · I (S) $750.00
- · Z (S) $1500.00
5(a)(1)
- Issued
- Aug 17, 1994
- Abate by
- Aug 22, 1994
- Penalty
- Initial $750 · Current $375 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) The hazard of being caught in the pinch point area between the rotating superstructure and the non-rotating undercarriage of the Link Belt crane on 08/16/94 on the Merrit Timber Sale. One feasible and acceptable abatement method among others to correct this hazard is to barricade the swing radius to the rear and sides of the crane to prevent an employee being crushed.
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.132 A
- Issued
- Aug 17, 1994
- Abate by
- Aug 22, 1994
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.1030 C01
- Issued
- Aug 17, 1994
- Abate by
- Sep 17, 1994
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.1030 D03 I
- Issued
- Aug 17, 1994
- Abate by
- Sep 17, 1994
1910.1030 G02
- Issued
- Aug 17, 1994
- Abate by
- Sep 17, 1994
More inspections at Roth Logging
View Roth Logging's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in SD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102797826.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.