HAUPPAUGE, NY —
OSHA Inspection: HARTCORN PLUMBING & HEATING INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of HARTCORN PLUMBING & HEATING INC. in 25 CORPORATE DR., HAUPPAUGE, NY 11788 (NAICS 000000). OSHA activity number 102907011.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARTCORN PLUMBING & HEATING INC.
- Site address
- 25 CORPORATE DR.
- City
- HAUPPAUGE
- State
- NY
- ZIP
- 11788
- Mailing
- 2333 ROUTE 112, MEDFORD, NY 11763
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1711
- Employees
- 2
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- May 29, 1991
- Abate by
- Jun 1, 1991
- Penalty
- Initial $600 · Current $300 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970. The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards associated with working [IDENTIFY THE RECOGNIZED HAZARD]: (a) Warehouse Building, Ground Floor - Employee was operating a Rigid pipe threading machine which was activated by a toggle switch that would not auto- matically shut the machine off if its operator was inadvertently caught up in its rotating parts; on or about 4/24/91. ABATEMENT NOTES: Among other methods, one feasible method to reduce this hazard is to establish and enforce adequate safe operating procedures. Procedures such as those stipulated in American National Pipe Threading Machines (ANSI B208.1-1982). Elements essential to an acceptable safe operating procedure include at a minimum: (1) Installation of a momentary contact device (deadman food switch) to control power input to the machine. This device would automatically stop the machine and the rotting pipe if the operator's foot was removed from the foot switch for any reason. (2) Provide training and education to the machine operators concerning all the appropriate procedures for the safe operation and use of this type of machinery.
Recent events (2)
- — I (S) $300.00
- — Z (S) $600.00
1926.20 B01
- Issued
- May 29, 1991
- Abate by
- Jul 1, 1991
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1926.21 B02
- Issued
- May 29, 1991
- Abate by
- Jun 1, 1991
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1926.404 B01 I
- Issued
- May 29, 1991
- Abate by
- Jun 1, 1991
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1926.404 F06
- Issued
- May 29, 1991
- Abate by
- Jun 1, 1991
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1903.2 A01
- Issued
- May 29, 1991
- Abate by
- Jun 1, 1991
- Penalty
- Initial $300 · Current $150 Reduced
Recent events (2)
- — I (O) $150.00
- — Z (O) $300.00
1910.20 G02
- Issued
- May 29, 1991
- Abate by
- Jun 1, 1991
1926.59 E01
- Issued
- May 29, 1991
- Abate by
- Jul 1, 1991
1926.59 G08
- Issued
- May 29, 1991
- Abate by
- Jul 1, 1991
1926.59 H
- Issued
- May 29, 1991
- Abate by
- Jul 1, 1991
More inspections at Hartcorn Plumbing & Heating INC.
View Hartcorn Plumbing & Heating INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102907011.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.