DOWNINGTOWN, PA ·
OSHA Inspection: SONOCO PRODUCTS CO., FIBER PARTITION DIVISION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SONOCO PRODUCTS CO., FIBER PARTITION DIVISION in 251 BOOT ROAD P.O. BOX 463, DOWNINGTOWN, PA 19335 (NAICS 000000). OSHA activity number 102945292.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SONOCO PRODUCTS CO., FIBER PARTITION DIVISION
- Site address
- 251 BOOT ROAD P.O. BOX 463
- City
- DOWNINGTOWN
- State
- PA
- ZIP
- 19335
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2631
- Employees
- 43
- Ownership type
- A
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 24, 1996
- Abate by
- Dec 11, 1996
- Penalty
- Initial $1,625 · Current $800 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazardous conditions posed by faulty equipment: a) Maren 122 Baler - The master control hydraulic locking device of the Maren 122 Baler, which controls the release of the trash baler door was not maintained in operative condition. A metal rod was routinely used by employees to pry open the door after a completed bale had been tied. Observed 09/24/96. b) Maren 122 Baler - A mechanical safety feature of the Maren 122 closed chamber automatic high density baler was not functioning. The "Full Bale" warning buzzer (which was designed to take the guess work out of the baling process and to achieve maximum density in each bale) had been disabled. Observed 09/24/96.
Recent events (2)
- · I (S) $800.00
- · Z (S) $1625.00
1910.133 A06
- Issued
- Oct 24, 1996
- Abate by
- Dec 11, 1996
- Penalty
- Initial $975 · Current $500 Reduced
Recent events (2)
- · I (S) $500.00
- · Z (S) $975.00
1910.212 A01
- Issued
- Oct 24, 1996
- Abate by
- Dec 11, 1996
- Penalty
- Initial $1,625
Recent events (2)
- · I (O)
- · Z (S) $1625.00
1910.303 B01
- Issued
- Oct 24, 1996
- Abate by
- Dec 11, 1996
- Penalty
- Initial $1,625 · Current $800 Reduced
Recent events (2)
- · I (S) $800.00
- · Z (S) $1625.00
1910.305 A01 I
- Issued
- Oct 24, 1996
- Abate by
- Dec 11, 1996
- Penalty
- Initial $1,625 · Current $800 Reduced
Recent events (2)
- · I (S) $800.00
- · Z (S) $1625.00
1910.305 G01 III
- Issued
- Oct 24, 1996
- Abate by
- Nov 26, 1996
- Penalty
- Initial $1,625
Recent events (2)
- · I (S)
- · Z (S) $1625.00
1904.2 A
- Issued
- Oct 24, 1996
- Abate by
- Nov 26, 1996
Recent events (2)
- · I (O)
- · Z (O)
1910.212 A03 II
- Issued
- Sep 24, 1996
- Abate by
- Jan 31, 1997
- Penalty
- Initial $1,625 · Current $800 Reduced
Recent events (2)
- · I (S) $800.00
- · Z (S) $1625.00
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102945292.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.