DELPHOS, OH ·
OSHA Inspection: NEW DELPHOS MFG. CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NEW DELPHOS MFG. CO. in 102 S. PIERCE ST., DELPHOS, OH 45833 (NAICS 000000). OSHA activity number 103059572.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEW DELPHOS MFG. CO.
- Site address
- 102 S. PIERCE ST.
- City
- DELPHOS
- State
- OH
- ZIP
- 45833
- Mailing
- P. O. BOX 309, DELPHOS, OH 45833
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3444
- Employees
- 70
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
17 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 16, 1989
- Abate by
- Mar 22, 1989
- Penalty
- Initial $160 · Current $90 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: The hazards of crushing, amputation, electrical shock and death while working on presses, slitters, formers, and other machines which were not positively locked out and could be inadvertently activated. Among other method, one feasible and acceptable abatement method to correct this hazard is to establish and enforce an adequate plant lockout procedure such as that stipulated by ANSI Z244.1-1982, Section 4 and 5, American National Standard of Minimum Safety Requirements for Lockout/Tagout of Energy Sources for Personnel Protection.Essential elements of the lockout procedure would include: 1) Open and lock out the main power disconnect for the machine and bleed off any residual energy; 2) Provide each potentially exposed employee working in the area with separate lock and key to be placed on the lockout means. 3) Establish a written lock out policy, including procedures to be followed and training for all affected employees, both maintenance and operational crews. 4) Periodically evaluate the program and strictly enforce all of its provisions.
Recent events (2)
- · I (S) $90.00
- · Z (S) $160.00
1910.179 H04
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
- Penalty
- Initial $360 · Current $180 Reduced
Recent events (2)
- · I (S) $180.00
- · Z (S) $360.00
1910.179 L03 III
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
- Penalty
- Initial $360 · Current $180 Reduced
Recent events (2)
- · I (S) $180.00
- · Z (S) $360.00
1910.179 M01
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
1910.179 N02 II
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
1910.217 C01 I
- Issued
- Feb 16, 1989
- Abate by
- Mar 22, 1989
- Penalty
- Initial $360 · Current $180 Reduced
Recent events (2)
- · I (S) $180.00
- · Z (S) $360.00
1910.217 C02 IA
- Issued
- Feb 16, 1989
- Abate by
- Mar 22, 1989
1910.217 C05 I
- Issued
- Feb 16, 1989
- Abate by
- Mar 22, 1989
1910.219 D01
- Issued
- Feb 16, 1989
- Abate by
- Mar 8, 1989
- Penalty
- Initial $120 · Current $60 Reduced
Recent events (2)
- · I (S) $60.00
- · Z (S) $120.00
1910.219 E03 I
- Issued
- Feb 16, 1989
- Abate by
- Mar 8, 1989
- Penalty
- Initial $120 · Current $60 Reduced
Recent events (2)
- · I (S) $60.00
- · Z (S) $120.00
1910.106 D02 I
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
1910.106 D02 II
- Issued
- Feb 16, 1989
- Abate by
- Mar 8, 1989
1910.157 C01
- Issued
- Feb 16, 1989
- Abate by
- Mar 8, 1989
1910.133 A01
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
1910.176 B
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
1910.252 A05 VD
- Issued
- Feb 16, 1989
- Abate by
- Feb 23, 1989
1910.304 F04
- Issued
- Feb 16, 1989
- Abate by
- Mar 1, 1989
More inspections at NEW Delphos MFG. CO.
View NEW Delphos MFG. CO.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 103059572.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.