NOBLE, IL ·
OSHA Inspection: GEORGE N. MITCHELL DRILLING COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GEORGE N. MITCHELL DRILLING COMPANY in H.C. MORRIS #4, SEC 17, TWP 3N, RNG 9E, NOBLE, IL 62868 (NAICS 000000). OSHA activity number 103281085.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GEORGE N. MITCHELL DRILLING COMPANY
- Site address
- H.C. MORRIS #4, SEC 17, TWP 3N, RNG 9E
- City
- NOBLE
- State
- IL
- ZIP
- 62868
- Mailing
- P.O. BOX 550, CARMI, IL 62821
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1381
- Employees
- 5
- Ownership type
- Private (A)
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
- Penalty
- Initial $240 · Current $168 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: ...the hazards of being seriously injured due to being struck by flying drilling mud and its associated high pressure piping from a failure in the connection between the flexible mud hose and the rig supply pipe in the mud supply line running from the Emsco model number E375 mud pump serial number 371 to the number one drilling rig located at the H.C. Morris number 4 wellsite, located in Section 17, Township 3 North, Range 9 East, Richland County (near Noble, IL). Among other methods, one fleasible and acceptable abatement method to correct this hazard is to provide a positive means of securing the ends of all flexible mudline connections with a safety chain or wire rope during drilling operations, as required by paragraph 8.14.3 of RP 54 Recommended Practices for Occuapational Safety and Health for Oil and Gas Well Drilling and Servicing Operations, and to insure that such means are properly installed following drilling rig setup and before the mud pump is placed into operation. DISCLAIMERS: 1) You are not limited to the abatement method suggested above. 2) The methods explained are general and may not be effective in all cases. 3) The employer is responsible for selecting and carrying out an appropriate abatement method.
Recent events (2)
- · I (S) $168.00
- · Z (S) $240.00
1910.23 C01
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
- Penalty
- Initial $120 · Current $84 Reduced
Recent events (2)
- · I (S) $84.00
- · Z (S) $120.00
1910.184 E02 II
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
- Penalty
- Initial $200 · Current $140 Reduced
Recent events (2)
- · I (S) $140.00
- · Z (S) $200.00
1910.184 E07 I
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
1910.212 A01
- Issued
- Dec 20, 1989
- Abate by
- Jan 5, 1990
- Penalty
- Initial $200 · Current $140 Reduced
Recent events (2)
- · I (S) $140.00
- · Z (S) $200.00
1910.242 A
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
- Penalty
- Initial $200 · Current $140 Reduced
Recent events (2)
- · I (S) $140.00
- · Z (S) $200.00
1910.22 A01
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
1910.22 A02
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
1910.22 C
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
1910.307 B
- Issued
- Dec 20, 1989
- Abate by
- Dec 29, 1989
1910.1200 E01 I
- Issued
- Dec 20, 1989
- Abate by
- Jan 24, 1990
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 103281085.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.