MCKINNEY, TX —
OSHA Inspection: EFRAIN GONZALES
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of EFRAIN GONZALES in 1701 S. CENTRAL EXPRESSWAY, MCKINNEY, TX 75069 (NAICS 000000). OSHA activity number 103626610.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EFRAIN GONZALES
- Site address
- 1701 S. CENTRAL EXPRESSWAY
- City
- MCKINNEY
- State
- TX
- ZIP
- 75069
- Mailing
- 8923 CARDELLA, DALLAS, TX 75217
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1742
- Employees
- 5
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 27, 1994
- Abate by
- Oct 3, 1994
- Penalty
- Initial $1,500 · Current $1,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Employees, performing drywall operations at the Cinemark Movie 10 construction site, in McKinney, Texas, were exposed to falling hazards created by the instability of the Grove SM3158E aerial lift, causing the work platform to overturn. Six Grove manufactured lifts were being utilized at the construction site area. a.Employees of Efrain Gonzales were working from elevated platforms. 1.The platforms were not on firm, level ground when it was elevated as specified by the manufacturer. 2.All systems and safety features were not functioning properly and not in good operational condition such as hydraulic leaks, taped condition such as hydraulic leaks, taped up 3 degree tilt alarm buzzer area at the control panel box, and other defiencies on the SM3158E, Serial #21167, aerial lift. 3.The elevated platform of the SM3158E aerial lift was being driven over pieces of sheetrock positioned under the hydraulic brake wheel which was not specified by the manufacturer. 4.The platform and deck extension of the SM3158E aerial lift was overloaded and was not in accordance with the manufacturer's design criteria. Feasible Abatement Among other methods, feasible and acceptable means of abatement to correcting these hazards include: 1.Only, raise the platform, when the aerial platform is on firm, flat, smooth, and level surfaces (unless otherwise Specified by the manufacturer). 2.Do not drive the platform elevated unless on a firm, level surface free from obstructions which includes pieces of sheetrock positioned under the lifts wheel. 3.Do not operate the machine until defiencies are corrected and systems are in good operating conditions. This would included any hydraulic leaks, taped alarms, and toher malfunctions. 4.Train all users (employers) and operating personnel on safe forklift operations as specified by the manufacturer. 5.Do not overload the platform and deck extension. Know all rated capacities.
1926.20 B02
- Issued
- Sep 27, 1994
- Abate by
- Oct 3, 1994
- Penalty
- Initial $1,500 · Current $1,500
1926.21 B02
- Issued
- Sep 27, 1994
- Abate by
- Oct 3, 1994
- Penalty
- Initial $1,500 · Current $1,500
1926.59 E01
- Issued
- Sep 27, 1994
- Abate by
- Oct 3, 1994
- Penalty
- Initial $750 · Current $750
1926.59 H
- Issued
- Sep 27, 1994
- Abate by
- Oct 3, 1994
- Penalty
- Initial $750 · Current $750
1926.95 A
- Issued
- Sep 27, 1994
- Abate by
- Oct 3, 1994
- Penalty
- Initial $1,500 · Current $1,500
1926.556 A02
- Issued
- Sep 27, 1994
- Abate by
- Oct 3, 1994
- Penalty
- Initial $1,500 · Current $1,500
More inspections in this industry (NAICS 000000)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 103626610.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.