Milford, NH ·
OSHA Inspection: OK TOOL CO INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of OK TOOL CO INC in ELM ST, Milford, NH 03055 (NAICS 000000). OSHA activity number 10393064.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OK TOOL CO INC
- Site address
- ELM ST
- City
- Milford
- State
- NH
- ZIP
- 03055
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3545
- Employees
- 185
- Industry flags
- Manufacturing safety.
Citations
17 citations on file for this inspection.
1910.219 E01 I
- Issued
- Aug 28, 1981
- Abate by
- Sep 21, 1981
- Penalty
- Initial $60 · Current $60
1910.219 E03 I
- Issued
- Aug 28, 1981
- Abate by
- Sep 21, 1981
- Penalty
- Initial $60 · Current $60
1910.305 B02
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
- Penalty
- Initial $120 · Current $120
1910.157 C01
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
1910.106 E02 IVA
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
- Penalty
- Initial $50 · Current $50
1910.157 C01
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
1910.212 A05
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
1910.213 H01
- Issued
- Aug 28, 1981
- Abate by
- Sep 21, 1981
1910.212 A01
- Issued
- Aug 28, 1981
- Abate by
- Sep 21, 1981
- Penalty
- Initial $50 · Current $50
1910.215 A04
- Issued
- Aug 28, 1981
- Abate by
- Sep 21, 1981
1910.215 B09
- Issued
- Aug 28, 1981
- Abate by
- Sep 21, 1981
1910.219 B01
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
- Penalty
- Initial $50 · Current $50
1910.242 B
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
- Penalty
- Initial $50 · Current $50
1910.252 A02 IVC
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
1910.303 G02 II
- Issued
- Aug 28, 1981
- Abate by
- Aug 31, 1981
1910.305 G01 IIIA
- Issued
- Aug 18, 1981
- Abate by
- Aug 21, 1981
1910.305 G02 II
- Issued
- Aug 18, 1981
- Abate by
- Aug 21, 1981
More inspections at OK Tool CO INC
View OK Tool CO INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 10393064.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.