CLEVELAND, OH ·
OSHA Inspection: OHIO DIE CUTTING & STAMPING
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of OHIO DIE CUTTING & STAMPING in 1900 TRAIN AVENUE, CLEVELAND, OH 44113 (NAICS 000000). OSHA activity number 105928071.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OHIO DIE CUTTING & STAMPING
- Site address
- 1900 TRAIN AVENUE
- City
- CLEVELAND
- State
- OH
- ZIP
- 44113
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3544
- Employees
- 6
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 2, 1990
- Abate by
- May 30, 1990
- Penalty
- Initial $810 · Current $486 Reduced
General-duty citation text
section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that: On 1/24/90, the employer failed to furnish his empoloyees working in or around a freight elevator located between the 3rd floor storage area, and the 2nd floor press room area, employment and a place of employment which was free from recognized hazards that were likely to cause death or serious physical harm to his employees in that: (1) The employer required or allowed employees to operate the elevator without proper safeguards. (2) The gate door had defective interlocks which will allow the elevator to operate when it is opened. (3) Employees were exposed to a potential crush hazard created by two(2) openings one measuring 1'9" from the top of the elevator's doorway, to the gate's top edge. The 2nd opening measures 1'5" from the bottom of the doorway, to the gate's bottom edge.
Recent events (2)
- · I (S) $486.00
- · Z (S) $810.00
1910.212 A03 II
- Issued
- Mar 2, 1990
- Abate by
- Apr 25, 1990
- Penalty
- Initial $360 · Current $216 Reduced
Recent events (2)
- · I (S) $216.00
- · Z (S) $360.00
1910.219 D01
- Issued
- Mar 2, 1990
- Abate by
- May 30, 1990
- Penalty
- Initial $360 · Current $120 Reduced
Recent events (2)
- · I (S) $120.00
- · Z (S) $360.00
1910.305 B01
- Issued
- Mar 2, 1990
- Abate by
- Mar 13, 1990
- Penalty
- Initial $450 · Current $450
Recent events (2)
- · I (S) $450.00
- · Z (S) $450.00
1910.305 B01
- Issued
- Mar 2, 1990
- Abate by
- Mar 13, 1990
Recent events (2)
- · I (S)
- · Z (S)
1910.305 B02
- Issued
- Mar 2, 1990
- Abate by
- Mar 15, 1990
- Penalty
- Initial $540 · Current $324 Reduced
Recent events (2)
- · I (S) $324.00
- · Z (S) $540.00
1910.1200 E01
- Issued
- Mar 2, 1990
- Abate by
- Jun 2, 1990
- Penalty
- Initial $270
Recent events (2)
- · I (O)
- · Z (S) $270.00
1910.1200 G01
- Issued
- Mar 2, 1990
- Abate by
- Jun 2, 1990
- Penalty
- Initial $270
Recent events (2)
- · I (O)
- · Z (S) $270.00
1910.1200 H
- Issued
- Mar 2, 1990
- Abate by
- Jun 2, 1990
- Penalty
- Initial $270 · Current $162 Reduced
Recent events (2)
- · I (S) $162.00
- · Z (S) $270.00
1903.2 A01
- Issued
- Mar 2, 1990
- Abate by
- Mar 15, 1990
More inspections at Ohio DIE Cutting & Stamping
View Ohio DIE Cutting & Stamping's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 105928071.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.