MONTGOMERY, AL ·
OSHA Inspection: CM MACHINERY CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CM MACHINERY CORPORATION in 2210 FLACK ROAD, MONTGOMERY, AL 36108 (NAICS 000000). OSHA activity number 106102049.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CM MACHINERY CORPORATION
- Site address
- 2210 FLACK ROAD
- City
- MONTGOMERY
- State
- AL
- ZIP
- 36108
- Mailing
- P.O.BOX 9007, MONTGOMERY, AL 36108
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3499
- Employees
- 15
- Ownership type
- A
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 11, 1996
- Abate by
- Jul 15, 1996
- Penalty
- Initial $450 · Current $225 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards of being struck by sprockets that were being hoisted by a defective air hoist, on or about May 14, 1996. The homemade air hoist on the Warner and Swasey lathe, rated at 1 ton capacity, would not support a 100 pound sprocket. The hoist would lose air pressure and the weight would return to the floor. Among other methods, one feasible and acceptable abatement method to correct this hazard is to repair the air leaks on the hoist so that it can sustain the weights that are applied.
Recent events (2)
- · I (S) $225.00
- · Z (S) $450.00
1910.147 C01
- Issued
- Jul 11, 1996
- Abate by
- Aug 22, 1996
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- · I (S) $225.00
- · Z (S) $450.00
1910.179 J02 III
- Issued
- Jul 11, 1996
- Abate by
- Aug 22, 1996
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- · I (S) $225.00
- · Z (S) $450.00
1910.179 J02 IV
- Issued
- Jul 11, 1996
- Abate by
- Aug 22, 1996
Recent events (2)
- · I (S)
- · Z (S)
1910.179 J03
- Issued
- Jul 11, 1996
- Abate by
- Aug 22, 1996
Recent events (2)
- · I (S)
- · Z (S)
1910.179 M01
- Issued
- Jul 11, 1996
- Abate by
- Jul 19, 1996
1910.179 N02 II
- Issued
- Jul 11, 1996
- Abate by
- Jul 15, 1996
1910.179 N04 I
- Issued
- Jul 11, 1996
- Abate by
- Jul 16, 1996
1910.212 A01
- Issued
- Jul 11, 1996
- Abate by
- Aug 22, 1996
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- · I (S) $225.00
- · Z (S) $450.00
1910.303 B01
- Issued
- Jul 11, 1996
- Abate by
- Aug 22, 1996
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- · I (S) $225.00
- · Z (S) $450.00
1910.303 G02 I
- Issued
- Jul 11, 1996
- Abate by
- Jul 15, 1996
1910.36 B04
- Issued
- Jul 11, 1996
- Abate by
- Jul 15, 1996
1910.178 P01
- Issued
- Jul 11, 1996
- Abate by
- Jul 15, 1996
1910.215 A04
- Issued
- Jul 11, 1996
- Abate by
- Jul 15, 1996
More inspections at CM Machinery Corporation
View CM Machinery Corporation's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 106102049.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.