TOLEDO, OH · 1993-11-10 00:00:00

OSHA Inspection: BENS TRUCK PARTS & EQUIPMENT, INC.

Complaint inspection · Safety discipline

At a glance

On 1993-11-10 00:00:00, OSHA opened a complaint safety inspection of BENS TRUCK PARTS & EQUIPMENT, INC. in 958 WALL ST., TOLEDO, OH 43610 (NAICS 000000). OSHA activity number 106124126.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bens Truck Parts & Equipment, INC. for free Get an email when a new federal OSHA severe-injury report for Bens Truck Parts & Equipment, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: BENS TRUCK PARTS & EQUIPMENT, INC.
Site address: 958 WALL ST.
City: TOLEDO
State: OH
ZIP: 43610

What kind of inspection was it?

Inspection type: Complaint (B)
Scope: Partial (B)
Discipline: Safety
Advance notice: No
Union status: Y

When did the case open and close?

Opened: 1993-11-10 00:00:00
Closing conference: 1993-11-15 00:00:00
Case closed: 1994-07-13 00:00:00
Last modified: 2014-07-28 00:00:00
Data loaded: 2014-07-31 01:01:47

Establishment context

NAICS code: 000000
SIC code (legacy): 5015
Employees: 14
Ownership type: A
Industry flags: Manufacturing safety.

Citations

15 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 1 exposed

Issued: Mar 9, 1994
Abate by: May 4, 1994
Penalty: Initial $1,500 · Current $500 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to:
The hazard(s) of being struck by a falling load while using the 7 1/2 ton
overhead crane, SN5384, located on the back dock.
Among other methods, feasible and acceptable abatement methods to correct
this hazard include
but are not limited to:
1.  Establish a maintenance program based on the manufacturer's
recommendations.
2.  Conduct complete periodic inspections at least yearly.
3.  Conduct monthly inspections of hoist chains and hooks, and document
findings.
4.  Clearly mark identification of functions on the pendant control box.

Recent events (2)

1994-04-04 00:00:00 · I (S) $500.00
1994-03-09 00:00:00 · Z (S) $1500.00

1910.147 C01

Deleted Serious Gravity 05 1 instance 14 exposed

Issued: Mar 9, 1994
Abate by: Mar 28, 1994
Penalty: Initial $1,050

Recent events (2)

1994-04-04 00:00:00 · I (S)
1994-03-09 00:00:00 · Z (S) $1050.00

1910.1200 E01

Deleted Serious Gravity 05 1 instance 14 exposed

Issued: Mar 9, 1994
Abate by: Mar 28, 1994
Penalty: Initial $1,050

Recent events (2)

1994-04-04 00:00:00 · I (S)
1994-03-09 00:00:00 · Z (S) $1050.00

1910.1200 F05 I

Deleted Serious Gravity 05 1 instance 14 exposed

Issued: Mar 9, 1994
Abate by: Mar 28, 1994
Penalty: Initial $1,050

Recent events (2)

1994-04-04 00:00:00 · I (S)
1994-03-09 00:00:00 · Z (S) $1050.00

1910.1200 F05 II

Deleted Serious Gravity 05 1 instance 14 exposed

Issued: Mar 9, 1994
Abate by: Mar 28, 1994

Recent events (2)

1994-04-04 00:00:00 · I (S)
1994-03-09 00:00:00 · Z (S)

1910.1200 G01

Deleted Serious Gravity 05 1 instance 14 exposed

Issued: Mar 9, 1994
Abate by: Mar 28, 1994
Penalty: Initial $1,050

Recent events (2)

1994-04-04 00:00:00 · I (S)
1994-03-09 00:00:00 · Z (S) $1050.00

1910.1200 H

Deleted Serious Gravity 05 1 instance 14 exposed

Issued: Mar 9, 1994
Abate by: Mar 28, 1994
Penalty: Initial $1,050

Recent events (2)

1994-04-04 00:00:00 · I (S)
1994-03-09 00:00:00 · Z (S) $1050.00