TAMPA, FL —
OSHA Inspection: MILLER SEPTIC TANK CO, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MILLER SEPTIC TANK CO, INC. in 1618 S. 51ST. STREET, TAMPA, FL 33619 (NAICS 000000). OSHA activity number 106383284.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MILLER SEPTIC TANK CO, INC.
- Site address
- 1618 S. 51ST. STREET
- City
- TAMPA
- State
- FL
- ZIP
- 33619
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3272
- Employees
- 8
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
18 citations on file for this inspection.
1903.2 A01
- Issued
- May 1, 1991
- Abate by
- May 25, 1991
- Penalty
- Initial $50 · Current $150
Recent events (2)
- — I (S) $150.00
- — Z (O) $50.00
5(a)(1)
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $200 · Current $100 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: the employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the heavy steel sides of concrete forms: a) Yard - In the course of the work year, as much as several times weekly when working, employees are exposed to the hazard of being struck by the sides of heavy steel forms which have been opened and kept from falling outward by lengths of 2X4's could be easily dislodged or even give way. Among other methods, one feasible and acceptable abatement method to correct this would be the use of heavy steel chains attached at the corners to keep the heavy steel sides of the forms from falling out.
Recent events (2)
- — I (S) $100.00
- — Z (S) $200.00
1910.22 A01
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $150 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $150.00
1910.23 C01
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $350 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $350.00
1910.27 B01 II
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $150 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $150.00
1910.27 D03
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $350 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $350.00
1910.147 C04 I
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $150 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $150.00
1910.147 C07 I
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $150 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $150.00
1910.179 F02 III
- Issued
- May 1, 1991
- Abate by
- May 25, 1991
- Penalty
- Initial $150 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $150.00
1910.179 N04 I
- Issued
- May 1, 1991
- Abate by
- May 25, 1991
- Penalty
- Initial $150 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $150.00
1910.1200 E01
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $100 · Current $100
1910.1200 F05 I
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $100 · Current $100
1910.1200 G01
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $100 · Current $100
1910.1200 H
- Issued
- May 1, 1991
- Abate by
- Jun 3, 1991
- Penalty
- Initial $100 · Current $100
1903.2 A01
- Issued
- May 1, 1991
- Abate by
- May 4, 1991
- Penalty
- Initial $50 · Current $50
1910.179 G01 V
- Issued
- May 1, 1991
- Abate by
- May 25, 1991
1910.179 G02 II
- Issued
- May 1, 1991
- Abate by
- May 25, 1991
1910.303 F
- Issued
- May 1, 1991
- Abate by
- May 25, 1991
More inspections at Miller Septic Tank CO, INC.
View Miller Septic Tank CO, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 106383284.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.