KANSAS CITY, MO —
OSHA Inspection: HAGGARD HAULING
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HAGGARD HAULING in 11TH & WALNUT, KANSAS CITY, MO 64106 (NAICS 000000). OSHA activity number 106634686.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HAGGARD HAULING
- Site address
- 11TH & WALNUT
- City
- KANSAS CITY
- State
- MO
- ZIP
- 64106
- Mailing
- 2100 GUINNOTTE, KANSAS CITY, MO 64120
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 4212
- Employees
- 3
- Ownership type
- A
Citations
2 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 6, 1991
- Abate by
- Nov 9, 1991
- Penalty
- Initial $375 · Current $375
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The %% employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) Jobsite at Walnut and 11th Street, Kansas City, Missouri. On August 23, 1991, at 9:55 a.m., an employee was observed being lowered from a 30 foot level to ground level in a crane suspended platform, which also contained a crate of unknown weight. The crane and rigging used to hoist the platform were deficient as follows: (1) The hook was not provided with a positive locking type latch - it was equipped with a spring loaded type latch only, exposing employees to the possible hazard of a dropped plat- form were the wire rope to lose tension momentarily due to occurrence such as malfunction or catching the platform on a building ledge; (2) The wedge and socket attachment of the overhead ball was not equipped with a wire rope clip on the free end of the load line; (3) No anti-two blocking device was provided on the crane boom, exposing employees to the possible hazard of a dropped platform due to raising the platform to a height where the load block would interfere with the boom tip. Among other methods, one feasible and acceptable abatement method to correct this hazard is to install the correct type of safety latch and to install an anti-two blocking device, in accordance with ASME/ANSI B30.5-1989, Section 5-3.2.2, "Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks and Slings - Mobile and Locomotive Cranes". (a) Essential elements include: (1) Install a positive locking safety latch on wire ropes used to hoist personnel platforms and install an anit-two blocking device to prevent two block damage to wire rope or rigging attachments. Another possible abatement method would be to ensure that cranes are not used in personnel hoisting operations unless in compliance with all applicable safety standards and regulations.
1910.180 H03 V
- Issued
- Nov 6, 1991
- Abate by
- Nov 9, 1991
- Penalty
- Initial $375 · Current $375
More inspections at Haggard Hauling
View Haggard Hauling's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 106634686.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.