DUTCH HARBOR, AK ·
OSHA Inspection: YUKON FISHERIES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of YUKON FISHERIES in F/V YUKON VIKING, OSI DOCK, DUTCH HARBOR, AK 99692 (NAICS 000000). OSHA activity number 107108110.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YUKON FISHERIES
- Site address
- F/V YUKON VIKING, OSI DOCK
- City
- DUTCH HARBOR
- State
- AK
- ZIP
- 99692
- Mailing
- 4215 21ST AVENUE WEST #103, SEATTLE, WA 98199
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2092
- Employees
- 23
- Ownership type
- Private (A)
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 30, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $1,500 · Current $1,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazardous energy: (a) F/V Yukon Viking: No written procedures had been developed and implemented on the lockout/tagout program to inform employees of the hazards involved, and the precautions to take when working on or repairing processing, mechanical, and electrical equipment in accordance with ANSI STD.Z244.1 and 29 CFR 1910.147. Among other methods to abate this hazard, one feasible method would be to implement a program using the samples provided to you and train your employees.
5(a)(1)
- Issued
- Mar 30, 1992
- Abate by
- May 4, 1992
- Penalty
- Initial $3,000 · Current $3,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to electrical hazards: (a) F/V Yukon Viking: Various electrical wiring(s) in the hydraulic tool and engine rooms were inadequately guarded to prevent accidental contact with live parts in accordance with 29 CFR 1910.303(g)(2) and National Electrical Code 70 article 230. Among other methods, one feasible and acceptable method to correct these hazards would be to conduct an evaluation and examination of all electrical wiring on board the vessel for practical safeguarding, and then make the necessary repairs for prevention.
5(a)(1)
- Issued
- Mar 30, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $2,100 · Current $2,100
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to electrical hazards: (a) F/V Yukon Viking: In the tool room, a Copeland refrigerator compressor was not guarded to prevent employees from accidental contact of live parts in accordance with 1910.303(g)(2) and National Electrical Code 70 article 445-6. Among other methods, one feasible and acceptable method to correct this hazard would be to replace the missing cover with the original cover or replacement cover.
1910.134 B01
- Issued
- Mar 30, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $1,500 · Current $1,500
1910.215 A04
- Issued
- Mar 30, 1992
- Abate by
- Apr 6, 1992
- Penalty
- Initial $900 · Current $900
1910.1200 E01
- Issued
- Mar 30, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $1,500 · Current $1,500
1910.1200 G01
- Issued
- Mar 30, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $1,500 · Current $1,500
1910.1200 H
- Issued
- Mar 30, 1992
- Abate by
- Apr 17, 1992
- Penalty
- Initial $1,500 · Current $1,500
1903.2 A01
- Issued
- Mar 30, 1992
- Abate by
- Apr 3, 1992
- Penalty
- Initial $600 · Current $600
1904.7
- Issued
- Mar 30, 1992
- Abate by
- Apr 3, 1992
- Penalty
- Initial $600 · Current $600
More inspections in this industry (NAICS 000000)
More inspections in AK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 107108110.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.