SCOTTDALE, GA —
OSHA Inspection: DAVIS MANUFACTURING
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of DAVIS MANUFACTURING in 541 PROCTOR AVE., SCOTTDALE, GA 30079 (NAICS 000000). OSHA activity number 107179210.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAVIS MANUFACTURING
- Site address
- 541 PROCTOR AVE.
- City
- SCOTTDALE
- State
- GA
- ZIP
- 30079
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2899
- Employees
- 8
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 27, 1993
- Abate by
- Apr 26, 1993
- Penalty
- Initial $600 · Current $400 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazard that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a. Compounding Area - Potential hazards of oxygen deficiency, toxic substances, flammable substances, or rescue devices when employees enter a confined space welding or retreiving an object from reactor vessels. A feasible and acceptable abatement method to correct this hazard include but not limited to develop a program through which the employer identifies all conditions which must be evaluated before confined space entry occurs and issue a written entry permit only after all conditions are determined to be acceptable. The program should include but not limited to the following as appropriate: 1. Hazard identification. Identify and evaluate each hazard of the permit spaces, including determination of severity; 2. Hazard control. Establish and implement the means, procedures and practices by which the permit spaces can be entered safely; 3. Permit system. Establish a written permit system for the proper preparation, issuance and implementation of entry permits. 4. Employee information. Signs shall be posted near permit spaces to notify employees what hazards may be present and that only authorized entrants may enter the permit spaces; 5. Prevention of unauthorized entry. Prevent unauthorized employee entry through such measures as training or by posting signs and barriers, as necessary; 6. Employee training. Train employees, as provided by this standard, so that attendants, authorized entrants and personnel authorizing or in charge of entry can work safely in and around the permit space; 7. Equipment. Provide, maintain and ensure the proper use of the equipment necessary for safe entry, including testing, monitoring, communication and personal protective equipment; 8. Rescue. Ensure that the procedures and equipment necessary to rescue entrants from permit spaces are implemented and provided; 9. Protection from external hazards. Ensure that all pedestrian, vehicle or other barriers necessary to protect entrants from external hazards are provided; 10. Duty to other employers. Ensure that, when an employer, such as a contractor, plans to send employees into a permit space which is under the control of another employer (host employer), the host employer provides the contractor with all available information on permit space hazards; on efforts to comply with this standard; and on any other workplace hazards, safety rules and emergency procedures of which the contractor needs to be aware in order to comply with this standard.
Recent events (2)
- — I (S) $400.00
- — Z (S) $600.00
1910.106 E02 IIB0
- Issued
- Jan 27, 1993
- Abate by
- Mar 1, 1993
- Penalty
- Initial $600 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $600.00
1910.106 E06 II
- Issued
- Jan 27, 1993
- Abate by
- Mar 1, 1993
- Penalty
- Initial $450 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $450.00
1910.120 Q01
- Issued
- Jan 27, 1993
- Abate by
- Mar 1, 1993
1910.151 C
- Issued
- Jan 27, 1993
- Abate by
- Mar 1, 1993
- Penalty
- Initial $450 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $450.00
1910.1200 E01
- Issued
- Jan 27, 1993
- Abate by
- Mar 1, 1993
- Penalty
- Initial $450 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $450.00
1910.1200 F05 I
- Issued
- Jan 27, 1993
- Abate by
- Mar 1, 1993
1910.1200 H
- Issued
- Jan 27, 1993
- Abate by
- Mar 1, 1993
- Penalty
- Initial $450
Recent events (2)
- — I (S)
- — Z (S) $450.00
1903.2 A01
- Issued
- Jan 27, 1993
- Abate by
- Feb 22, 1993
- Penalty
- Initial $300 · Current $300
More inspections at Davis Manufacturing
View Davis Manufacturing's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 107179210.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.