Buffalo, NY ·
OSHA Inspection: STANDARD MILLING CO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STANDARD MILLING CO in 503 SENECA STREET, Buffalo, NY 14204 (NAICS 000000). OSHA activity number 10801868.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STANDARD MILLING CO
- Site address
- 503 SENECA STREET
- City
- Buffalo
- State
- NY
- ZIP
- 14204
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2041
- Employees
- 125
- Industry flags
- Manufacturing safety.
Citations
19 citations on file for this inspection.
1910.219 E03 I
- Issued
- Oct 20, 1976
- Abate by
- Apr 19, 1977
- Penalty
- Initial $700 · Current $700
Recent events (2)
- · Z (S) $700.00
- · P (S) $700.00
1910.219 F03
- Issued
- Oct 20, 1976
- Abate by
- Feb 18, 1977
- Penalty
- Initial $50 · Current $50
Recent events (2)
- · Z (O) $50.00
- · P (O) $50.00
1910.242 B
- Issued
- Oct 20, 1976
- Abate by
- Oct 28, 1976
1910.22 D
- Issued
- Oct 20, 1976
- Abate by
- Nov 18, 1976
1910.23 C01
- Issued
- Oct 20, 1976
- Abate by
- Nov 18, 1976
- Penalty
- Initial $50 · Current $50
1910.37 Q01
- Issued
- Oct 20, 1976
- Abate by
- Oct 28, 1976
1910.23 D01 IV
- Issued
- Oct 20, 1976
- Abate by
- Nov 4, 1976
1910.219 E01 I
- Issued
- Oct 20, 1976
- Abate by
- Nov 18, 1976
- Penalty
- Initial $50 · Current $50
1910.219 E01 I
- Issued
- Oct 20, 1976
- Abate by
- Feb 18, 1977
Recent events (2)
- · Z (O)
- · P (O)
1910.23 D01 III
- Issued
- Oct 20, 1976
- Abate by
- Nov 4, 1976
1910.24 F
- Issued
- Oct 20, 1976
- Abate by
- Nov 4, 1976
1910.22 B02
- Issued
- Oct 20, 1976
- Abate by
- Nov 4, 1976
1910.212 A05
- Issued
- Oct 20, 1976
- Abate by
- Nov 4, 1976
1910.176 B
- Issued
- Oct 20, 1976
- Abate by
- Oct 23, 1976
- Penalty
- Initial $35 · Current $35
1910.68 C07 IIB
- Issued
- Oct 20, 1976
- Abate by
- Oct 28, 1976
- Penalty
- Initial $45 · Current $45
1910.68 B14 II
- Issued
- Oct 20, 1976
- Abate by
- Oct 28, 1976
- Penalty
- Initial $35 · Current $35
1910.68 B08 I
- Issued
- Oct 20, 1976
- Abate by
- Feb 24, 1977
- Penalty
- Initial $60 · Current $60
Recent events (2)
- · Z (O) $60.00
- · P (O) $60.00
1910.157 C02 I
- Issued
- Oct 20, 1976
- Abate by
- Oct 28, 1976
1910.23 A03
- Issued
- Oct 20, 1976
- Abate by
- Nov 4, 1976
More inspections at Standard Milling CO
View Standard Milling CO's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 10801868.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.