BAY SHORE, NY ·
OSHA Inspection: THERMEX/THERMATRON INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of THERMEX/THERMATRON INC. in 60 SPENCE STREET, BAY SHORE, NY 11706 (NAICS 000000). OSHA activity number 108804840.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THERMEX/THERMATRON INC.
- Site address
- 60 SPENCE STREET
- City
- BAY SHORE
- State
- NY
- ZIP
- 11706
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (Y)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3569
- Employees
- 50
- Ownership type
- Private (A)
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 12, 1994
- Abate by
- Feb 15, 1994
- Penalty
- Initial $1,250 · Current $625 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970. The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being pulled into and crushed by the rotating parts of a pipe threading machine: (a) Assembly area; Employees operating a Ridge pipe threading machine which was activated by a toggle switch that would not automatically shut the machine off if its operator was inadvertently caught up in its rotating parts: on or about 12/7/93. ABATEMENT NOTES: Among other methods, one feasible method to reduce this hazard is to establish and enforce adequate safe operating procedures. Procedures such as those stipulated in American National Standard for Portable Pipe Threading Machines (ANSI B208.1-1982). Elements essential to an acceptable safety operating procedure include at a minimum: 1. Installation of a momentary contact device (deadman foot switch) to control power input to the machine. This device would automatically stop the machine and the rotating pipe if the operator's foot was removed from the foot switch for any reason. 2. Provide training and education to the machine operators concerning all the appropriate procedures for the safe operation and use of this type of machinery.
Recent events (2)
- · I (S) $625.00
- · Z (S) $1250.00
1910.23 D01 II
- Issued
- Jan 12, 1994
- Abate by
- Feb 1, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1910.107 B01
- Issued
- Jan 12, 1994
- Abate by
- Feb 1, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1910.107 B05 I
- Issued
- Jan 12, 1994
- Abate by
- Jan 25, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1910.107 B05 I
- Issued
- Jan 12, 1994
- Abate by
- Mar 1, 1994
Recent events (2)
- · I (S)
- · Z (S)
1910.107 E09
- Issued
- Jan 12, 1994
- Abate by
- Feb 1, 1994
- Penalty
- Initial $500 · Current $500
Recent events (2)
- · I (S) $500.00
- · Z (S) $500.00
1910.107 G01
- Issued
- Jan 12, 1994
- Abate by
- Jan 18, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1910.178 M03
- Issued
- Jan 12, 1994
- Abate by
- Jan 18, 1994
- Penalty
- Initial $500 · Current $500
Recent events (2)
- · I (S) $500.00
- · Z (S) $500.00
1910.213 H01
- Issued
- Jan 12, 1994
- Abate by
- Feb 1, 1994
- Penalty
- Initial $625 · Current $625
Recent events (2)
- · I (S) $625.00
- · Z (S) $625.00
1910.253 B04 III
- Issued
- Jan 12, 1994
- Abate by
- Jan 25, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1910.1200 E01
- Issued
- Jan 12, 1994
- Abate by
- Mar 1, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1910.1200 G08
- Issued
- Jan 12, 1994
- Abate by
- Mar 1, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1910.1200 H
- Issued
- Jan 12, 1994
- Abate by
- Mar 1, 1994
- Penalty
- Initial $375 · Current $375
Recent events (2)
- · I (S) $375.00
- · Z (S) $375.00
1903.2 A01
- Issued
- Jan 12, 1994
- Abate by
- Jan 18, 1994
Recent events (2)
- · I (O)
- · Z (O)
1904.2 A
- Issued
- Jan 12, 1994
- Abate by
- Mar 1, 1994
Recent events (2)
- · I (O)
- · Z (O)
1910.37 K02
- Issued
- Jan 12, 1994
- Abate by
- Feb 1, 1994
Recent events (2)
- · I (O)
- · Z (O)
1910.157 E03
- Issued
- Jan 12, 1994
- Abate by
- Feb 1, 1994
Recent events (2)
- · I (O)
- · Z (O)
1910.304 E01 IV
- Issued
- Jan 12, 1994
- Abate by
- Feb 1, 1994
Recent events (2)
- · I (O)
- · Z (O)
More inspections at Thermex/Thermatron INC.
View Thermex/Thermatron INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 108804840.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.