LAKEHURST, NJ ·
OSHA Inspection: NAVAL AIR WEAPONS CENTER AIR CRAFT DIV
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NAVAL AIR WEAPONS CENTER AIR CRAFT DIV in LAKEHURST, LAKEHURST, NJ 08733 (NAICS 000000). OSHA activity number 108943663.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NAVAL AIR WEAPONS CENTER AIR CRAFT DIV
- Site address
- LAKEHURST
- City
- LAKEHURST
- State
- NJ
- ZIP
- 08733
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- Union (Y)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 9711
- Employees
- 2822
- Ownership type
- Federal government (D)
Citations
17 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 12, 1992
- Abate by
- Aug 1, 1992
General-duty citation text
Section 1-201(a) od Executive Order 12196 of February 1980, %% Occupational Safety and Health Programs for Federal Employees: the employer did not furnish to employees places and conditions of employment that were free from recognized hazards that are causing or likely to cause death or serious physical harm in that employees were exposed to potential unexpected exposure to toxic, flammable/explosive, or oxygen enriched or deficient atmospheres and/or biological or mechanical hazards while performing servicing, maintenance, inspection or similar activities in confined spaces: a) Facility - Employees, such as mechanics and machine operators, were permitted to enter confined spaces, such as sandblasting pits or tunnels, without benefit of pre-planning for entry, worker instruction programs, and rescue procedures, as applicable, being instituted. One feasible and acceptable method, among others, to correct this hazard is to institute a formal Confined Space Entry Program such as, but not limited to programs outlined in ANSI Z117.1 - 1989; ASTM D4276 - 84; proposed standard 20 CFR 1910.146, Federal Register dated 6/5/89, and NIOSH Publication 80-106. Or, implement and enforce the recommendations of the local activity's procedure "entering Tanks and other Enclosed Spaces." On or about 1/24/92.
Recent events (2)
- · I (S)
- · Z (S)
1910.22 A01
- Issued
- Jun 12, 1992
- Abate by
- Aug 14, 1992
1910.36 B04
- Issued
- Jun 12, 1992
- Abate by
- Feb 28, 1993
Recent events (3)
- · P (S)
- · I (S)
- · Z (S)
1910.120 Q02 II
- Issued
- Jun 12, 1992
- Abate by
- Aug 14, 1992
1910.120 Q02 X
- Issued
- Jun 12, 1992
- Abate by
- Aug 14, 1992
1910.147 C01
- Issued
- Jun 12, 1992
- Abate by
- Oct 31, 1992
Recent events (2)
- · P (S)
- · Z (S)
1910.177 D03 III
- Issued
- Jun 12, 1992
- Abate by
- Jul 15, 1992
1910.177 D03 IV
- Issued
- Jun 12, 1992
- Abate by
- Jul 15, 1992
1910.184 F05 III
- Issued
- Jun 12, 1992
- Abate by
- Jun 18, 1992
1910.212 A01
- Issued
- Jun 12, 1992
- Abate by
- Aug 14, 1992
1910.212 A03 II
- Issued
- Jun 12, 1992
- Abate by
- Aug 21, 1992
Recent events (2)
- · P (S)
- · Z (S)
1910.1030 C01 I
- Issued
- Jun 12, 1992
- Abate by
- Aug 1, 1992
Recent events (2)
- · I (S)
- · Z (S)
1910.1200 H02 I
- Issued
- Jun 12, 1992
- Abate by
- Aug 14, 1992
1910.1200 H02 II
- Issued
- Jun 12, 1992
- Abate by
- Aug 14, 1992
1910.20 G01 I
- Issued
- Jun 12, 1992
- Abate by
- Jul 22, 1992
Recent events (2)
- · I (O)
- · Z (O)
1910.20 G01 II
- Issued
- Jun 12, 1992
- Abate by
- Jul 22, 1992
Recent events (2)
- · I (O)
- · Z (O)
1910.20 G01 III
- Issued
- Jun 12, 1992
- Abate by
- Jul 22, 1992
Recent events (2)
- · I (O)
- · Z (O)
More inspections in this industry (NAICS 000000)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 108943663.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.