Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: BLACKHAWK FIRE PROTECTION

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of BLACKHAWK FIRE PROTECTION in 565 ALBANY AVE., AMITYVILLE, NY 11701 (NAICS 000000). OSHA activity number 109109561.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Blackhawk Fire Protection for free Get an email when a new federal OSHA severe-injury report for Blackhawk Fire Protection is published. One employer, no account, unsubscribe in one click.
Site address
565 ALBANY AVE.
City
AMITYVILLE
State
NY
ZIP
11701
Mailing
120-F NANCY ST., W. BABYLON, NY 11704
Inspection type
Unprogrammed Related (G)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Y
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
1711
Employees
2
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 1 exposed
Issued
Apr 29, 1992
Abate by
May 12, 1992
Penalty
Initial $750 · Current $750
Section 5(a)(1) of the Occupational Safety and Health Act of 1970.  The
employer did not furnish employment and a place of employment which
were free from recognized hazards that were causing or likely to cause
death or serious physical harm to employees in that employees were
exposed to the hazards of being pulled into and crushed by the rotating
parts of a pipe threading machine:
(a)  At the Worksite, Main Building - Employees operated
a Rigid 300 pipe threading machine which was activated
by a toggle switch that would not automtically shut
the machine off it its opeator was inadvertently
caught up in its rotating parts; on or about 2/29/92.
(b)  At the Worksite, Main Building, First Floor - Employee
operated a Rigid 300 pipe threading machine which was
activated by a toggle switch that would not automatically
shut the machine off if its operator was inadvertently
caught up in its rotating parts; on or about 3/10/92.
ABATEMENT NOTES:
Among other methods, one feasible method to reduce this hazard is to
establish and enforce adequate safe operating procedures.  Procedures
such as those stipulated in American National Standard for Portable
Pipe Threading Machines (ANSI B208.1-1982).  Elements essential to an
acceptable safe operating procedure include at a minimum:
1.   Installation of a momentary contact device (deadman foot
switch) to control powewr input to the machine.  This device
would automatically stop the machine and the rotating  pipe
if the operator's foot was removed from the foot switch for
any reason.
2.  Provide training and education to the machine operators
concerning all the apporpriate procedures for the safe
operation and use of this type of machinery.
Recent events (2)
  • · D (S) $750.00
  • · Z (S) $750.00

1926.20 B01

Serious Gravity 03 1 instance 6 exposed
Issued
Apr 29, 1992
Abate by
Jun 2, 1992
Penalty
Initial $750 · Current $750
Recent events (2)
  • · D (S) $750.00
  • · Z (S) $750.00

1926.21 B02

Serious Gravity 03 1 instance 3 exposed
Issued
Apr 29, 1992
Abate by
May 4, 1992
Penalty
Initial $750 · Current $750
Recent events (2)
  • · D (S) $750.00
  • · Z (S) $750.00

1903.2 A01

Other-than-serious Gravity 00 1 instance 2 exposed
Issued
Apr 29, 1992
Abate by
May 4, 1992
Recent events (2)
  • · D (O)
  • · Z (O)

1904.2 A

Other-than-serious Gravity 00 1 instance 2 exposed
Issued
Apr 29, 1992
Abate by
Jun 2, 1992
Recent events (2)
  • · D (O)
  • · Z (O)

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109109561.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.