BRIDGEPORT, CT ·
OSHA Inspection: PROFESSIONAL HOME BUILDERS & DESIGN LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PROFESSIONAL HOME BUILDERS & DESIGN LLC in 69 VINE STREET, BRIDGEPORT, CT 06604 (NAICS 238160). OSHA activity number 109174680.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PROFESSIONAL HOME BUILDERS & DESIGN LLC
- Site address
- 69 VINE STREET
- City
- BRIDGEPORT
- State
- CT
- ZIP
- 06604
- Mailing
- 226 BAXTER LANE, MILFORD, CT 06460
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- SIC code (legacy)
- 1761
- Employees
- 7
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 11, 2009
- Abate by
- Dec 19, 2009
- Penalty
- Initial $750 · Current $750
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recogn ized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to being struck by collapsing struc tures: WORKSITE: The front porch roof was inadequately supported in that: 1. The wood columns, placed on several small pieces of plywood were not properly secur ed in place between the roof and floor joists. 2. The masonry columns used to su pport the floor joists were old, missing mortar between the bricks and one colum n had a piece of wood in place of a missing brick. Among other methods, one and acceptable method to correct this hazard is to: 1. Ensure the supporting structu res are properly designed and installed. 2. Develop and implement procedures on acceptable methods to install supporting structures. 3. Instruct and train employees on the acceptable methods to be foll owed. 4. Utilize other available engineering feasibility, technology and methods .
1926.34 C
- Issued
- Dec 11, 2009
- Abate by
- Dec 19, 2009
- Penalty
- Initial $600 · Current $600
1926.95 A
- Issued
- Dec 11, 2009
- Abate by
- Dec 15, 2009
- Penalty
- Initial $750 · Current $750
1926.100 A
- Issued
- Dec 11, 2009
- Abate by
- Dec 15, 2009
- Penalty
- Initial $0 · Current $0
1926.501 B13
- Issued
- Dec 11, 2009
- Abate by
- Dec 15, 2009
- Penalty
- Initial $1,500 · Current $1,500
1926.503 A01
- Issued
- Dec 11, 2009
- Abate by
- Dec 28, 2009
- Penalty
- Initial $750 · Current $750
1926.1060 A
- Issued
- Dec 11, 2009
- Abate by
- Dec 28, 2009
- Penalty
- Initial $0 · Current $0
1926.1051 A
- Issued
- Dec 11, 2009
- Abate by
- Dec 19, 2009
- Penalty
- Initial $600 · Current $600
1926.1053 B01
- Issued
- Dec 11, 2009
- Abate by
- Dec 15, 2009
- Penalty
- Initial $750 · Current $750
1926.1053 B05 I
- Issued
- Dec 11, 2009
- Abate by
- Dec 15, 2009
- Penalty
- Initial $750 · Current $750
More inspections in this industry (NAICS 238160)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109174680.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.